Parts Needed to Flat Tow 2014 Cadillac SRX Behind RV

Published 05/11/2017

Products Featured in This Question

Roadmaster Crossbar-Style Base Plate Kit - Removable Arms

(2214)

$575.00

Blue Ox Patriot Portable Flat Tow Brake System - Proportional

(577)

$1452.72

Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Coiled Adapter Cord

(3596)

$164.61

Roadmaster Falcon 2 Tow Bar - RV Mount - 2" Hitch - 6,000 lbs

(429)

$850.00

RoadMaster 68" Single Hook, Coiled Safety Cables - 6,000 lbs

(679)

$73.40

Question:

Hi, I have questions. I like to get all parts for dinghy tow my vehicles by my Berkshire 40 feet diesel pusher. Please list up all parts and accessory for Dinghy tow my vehicle which is 2014 Cadillac SRX FWD without distronic and like to get at least 2014 Cadillac SRX - Roadmaster EZ4 Base Plate Kit - Removable Arms. I will install all parts by myself. I need base plate, Tow bar, Wire harness,safety equipment, accessory, Patriot brake system, and so on. I do not want to order some missing parts later. Please list up the best equipment for me. Thank you.

asked by: Yoshi

Expert Reply:

First you need the base plate kit which you have already picked out part # RM-523162-4 which is a confirmed fit for your 2014 Cadillac SRX without cruise control.

In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon 2, # RM-520. For safety cables you can use # RM-643. The coiled design helps keep the cables off of the ground.

For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.

And finally, most states now require supplemental braking in the vehicle being flat towed. The easiest system to set up and use is the Blue Ox Patriot # BLU37TR, that applies the vehicle brakes in proportion to how much the tow vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles.

Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry.

I have included a couple of helpful links to our articles on flat towing for you. Be sure to consult the vehicle owners manual for more specific information on flat towing your vehicle.