Adding a 7-Way Trailer Connector and Brake Controller to a 2002 Chevy Blazer
Updated 05/04/2017 | Published 05/03/2017 >
Products Featured in This Question
Question:
Im wanting to wire my 2002 blazer 4wd so it has trailer brakes. It does not have a four way connector. What all do I need to get this completed.
asked by: Jason
Helpful Expert Reply:
To install a brake controller on your 2002 Chevy Blazer you will first need to install a 4-Way trailer connector using # HM41225. In order to install the harness to the correct tail light wires on the vehicle I recommend using circuit tester # PTW2993 to test the vehicle wiring. On the harness white is ground and will attach to the sheet metal of the vehicle or the frame. Brown is for tail/running lights, yellow is left turn signal and brake lights and green is right turn and brake lights.
After the 4-Way has been installed you will need to install a 7-Way and the wiring for a brake controller. For that use installation kit # ETBC7. I have included some links that show and explain the ETBC7 installation for you.
For a brake controller I recommend the P2 # 90885 because it is easy to set up and use and it is reliable.
Product Page this Question was Asked From
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: My Vehicle has a 4-Pin Trailer Plug, but Trailer has 7-Pin Trailer Plug
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: How to Measure for Trailer Hitch Drop
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Trailer Wiring and Brake Controller Set up For a 2003 Ford Van E350
- Q&A: What Wiring do I Need to get My 2022 Toyota Highlander Ready for Redarc Tow-Pro Brake Controller?
- Q&A: Comparing the Universal Installation Kit # ETBC7 and the 7-Way RV Upgrade Kit # ETBC7L
- Q&A: Recommended Brake Controller and Wiring Harness for a 2006 Dodge Ram w/a Factory 4-Way





