Converting Trailer from 5-Way Connector to a 7-Way by Function
Updated 04/28/2017 | Published 04/27/2017
Question:
Hi, I have decided to change my 5 pin flat plug on my 2016 eagle boat trailer to a 7 pin round plug. As all of my vehicles have the 7pin or flat pin round connector receptacle. I dont like using the 7pin round to flat plug adapter, as its just one more thing I can forget. Im a CFESA certified electrical worker and very versed in waterproof electric work. So the connections are of no concern. In the picture youll see the 5pin flat plug on my trailer. My question is.... Can you identify the wire colors to their duty? I know the blue is likely for the reverse lights that my trailer does have. Because before I was using a 7pin round to 4pin flat and letting the 5th pin on the trailer plug just over hang. All the other lights work except the reverse lights. Which leads me to believe the blue wire is for the reverse lights. My trailer does NOT have any braking system. So if you can... please help me identify the wire colors to their duty, and I can make the connections to the 7pin connector once I acquire it from you likely you guys. Thanks in advance.
asked by: Luke S
Expert Reply:
I've linked a help article that will give you the common color coding but on your trailer I wouldn't go by it. Even if they are correct you just never know so I suggest testing it.
To test it cut off the 5-way connector that's on there and connect each wire to a 12-volt power source and see what functions.
Then use a 7-way connector like the Hopkins # H20043 and connect the function to the correct leads. Even the Hopkins does not use the traditional color coding. Instead it uses the following:
White - Ground
Red - Left Turn and Left Brake (Usually yellow)
Brown - Right Turn and Right Brake (Usually green)
Green - Tail (Usually brown)
Blue - Brakes
Black - 12 Volt Hot
Yellow - Reverse
Product Page this Question was Asked From
7-Way Molded Trailer Wire Connector, 4' Long
- Trailer Wiring
- Trailer Connectors
- Trailer End Connector
- 7 Blade
- Plug and Lead
- Hopkins
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Trailer Wiring Diagrams
- Search Results: trailer wiring
- Shop: 7-Way Molded Trailer Wire Connector, 4' Long
- Search Results: trailer lights
- Search Results: optronics trailer wiring
- Search Results: marine carpet
- Search Results: yates bow roller
- Shop: Kenda Karrier KR53 ST205/75R14 Radial Trailer Tire with 14" Black Mod Wheel - 5 on 4-1/2
- Search Results: floor jack
- Shop: Powerbuilt Unijack - 18-3/8" Lift - 2 Tons
- Search Results: bearing buddy 244
- Shop: Taskmaster 5.30R12 Radial Trailer Tire w/ 12" Vesper Silver Mod Wheel - 4 on 4 - LR C
- Shop: Kenda Karrier ST145/R12 Radial Trailer Tire with 12" Black Mod Wheel - 5 on 4-1/2 - LR D
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Shop: Trailer Wiring Junction Box - 7 Color Coded Terminals - ABS
- Shop: Hopkins 7-Way RV Style Connector with Molded Cable - Trailer End - 8' Long - RV Standard
- Q&A: Replacing Trailer 5-Way Connector That has 7 Wires
- Q&A: Replacing 5-Way of Trailer that Has Two White and Brown Wires
- Shop: Trailer Hitch
- Video: The Low-Down on the 7-Way Molded Trailer Wire Connector, 4' Long
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Replacing a 4-Way Connector with 7 Wires on a 2007 Tracker Trailstar Boat Trailer
- Q&A: Tracker Boat Trailer Wires With 7 Wires Connecting Into A 4 Pin Plug
- Q&A: Different Types of Light Bulbs Used in Trailer Lights
- Q&A: Can 4-Way Trailer Wiring have 7 Wires Ran to It
- Shop: RV Exterior Lighting
- Q&A: Where To Attach Blue Wire From 5 Wires on Trailer When Installing a 7-Way Connector
- Video: The Low-Down on the Powerbuilt Unijack
- Video: etrailer 7 Way Upgrade Kit With Junction Box Installation
- Video: Installation: Curt Trailer Hitch Receiver on a 2024 Hyundai Tucson
on Trailer Wiring
