Replacement Electric Drum Brake for 1997 Pace American Car Hauler Trailer
Updated 04/11/2017 | Published 04/09/2017 >
Products Featured in This Question
Question:
Recently aquired this 1997 pace american car hauler 20ft i wanted to test trailer brakes and found all 3 wheels lock and stop properly. the left front when applied only hums and thats it. I hear the drum dragging even before brakes are applied could a magnet be the cause of just a hum and not enguaging?
asked by: Michael
Expert Reply:
It is normal for an electric drum brake magnet to hum when it is receiving 12V power from your brake controller. However, since you hear the drum dragging on the brake shoes even before you apply the brakes this suggest a mechanical failure in that one brake. Chances are it is not the magnet causing your trouble but is more likely to be a broken spring or damaged brake shoe.
I suggest you pull that hub and inspect the brake. You may want to pull the other wheel on that same side so you have a working brake to use for visual comparison. This may make it easier to find the problem in the one bad brake.
We do offer all sorts of replacement parts for brakes but with the cost of a complete new brake assembly being so close to the cost of even just a few parts you may want to save yourself the time and hassle and simply replace the brake.
You can use the linked page to choose a left-hand brake. Be sure to match your axle capacity, drum size and mounting bolt pattern. For instance, for a 10 x 2-1/4-inch left brake for a 3500-lb axle that has a 4-bolt brake flange use # AKEBRK-35L-SA
Product Page this Question was Asked From
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Q&A: My Vehicle has a 4-Pin Trailer Plug, but Trailer has 7-Pin Trailer Plug
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: How to Measure for Trailer Hitch Drop
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: What Wiring do I Need to get My 2022 Toyota Highlander Ready for Redarc Tow-Pro Brake Controller?
- Q&A: Trailer Wiring and Brake Controller Set up For a 2003 Ford Van E350
- Q&A: Comparing the Universal Installation Kit # ETBC7 and the 7-Way RV Upgrade Kit # ETBC7L
- Q&A: What is the Difference Between the Tekonsha Prodigy P2 and the P3 Brake Controllers

