Should Bolts be Tightened Down Completely on Leaf Spring Hangers
Published 03/31/2017
Question:
I have attached a picture of a trailers leaf spring hangers. Some bolts are seated completely, other are not. Is this correct of should all be tighted down completely.
asked by: Kevin K
Expert Reply:
I definitely recommend pulling the bolts in until the head is flush with the hangers on your trailer's suspension. It's possible everything will work okay as they are now, but to be safe all the bolts should be tightened down completely. Even when tightened down, there will be some necessary movement there, but you will still want it as secure as possible.
I have attached a leaf spring installation video that you may also find helpful
Product Page this Question was Asked From
Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 13-1/8" Long Equalizers
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 2 Inch
- Tandem Axle
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: 8k springs
- Search Results: wire
- Search Results: led tail lights
- Search Results: ramp springs
- Shop: Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 12" Long Equalizers
- Shop: Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 13-1/8" Long Equalizers
- Search Results: sp~161275
- Q&A: Hanger Kit and Slipper Spring Spacing for Tandem 7,000 lb Axles to Add 16 Inch Wheels
- Search Results: slipper springs
- Video: Review of M-3 and Associates Trailer Ramp Springs - Single Ramp Spring - M366FR
- Shop: Equalizer Suspension Bolt with Grease Zerk Fitting - 5-1/4" Long
- Shop: Wet Equalizer Bolt with Castle Nut and Grease Zerk - 4-11/16" Long - 7/8" Diameter
- Shop: Tandem-Axle Trailer Equalizer Kit for 2" Slipper Springs - 13-1/8" Long Equalizers
- Shop: Dexter Tandem-Axle Trailer Equalizer Kit for 2" Slipper Springs - 13-1/8" Long Equalizers
- Search Results: apubr~9
- Shop: 5-Leaf Slipper Spring for 7,000-lb Trailer Axles - 26-1/2" Long - EMCO
- Q&A: How to Determine Hanger Spacing on a Tandem-Axle Trailer Hanger Kit for Slipper Springs
- Q&A: Hanger, U-Bolt, and Slipper Spring Kit for 8k Trailer Axles
- Video: Installation of the TruRyde Equalizer for 2" Wide Slipper Springs
- Video: The Low-Down on the Tandem-Axle Trailer Equalizer Kit for 2" Slipper Springs
- Video: The Low-Down on the Equalizer for 2" Wide Slipper Springs
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Video: Hands-On with the Dexter Trailer Springs Over-Under Conversion Kit
- Video: A Closer Look at the Dexter 7-Leaf Slipper Spring w/ Hook End for 8,000-lb Trailer Axles
- Video: All You Need to Know About the Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs
- Q&A: Distance Between Hangers When Installing Slipper Springs
- Q&A: Spring Spring Hanger Spacing for Spring e46SR
- Q&A: Bearing Kit for EZ Loader Part Number 300-020885
- Shop: Vehicle Tow Bar Wiring
- Q&A: Replacement Bushing For Dexter 5-Leaf 10,000 Pound Axle Slipper Spring DX45QR
on Trailer Suspension Parts
