Is 2012 Ford F-53 Fleetwood Bounder Pre-Wired for Brake Controller

Updated 03/30/2017 | Published 03/29/2017

Question:

How I can find out if my RV - a Class A motorhome / 2012 Fleetwood Bounder, Ford gas chassi - is factory wired to receive a brake controller? Thx

asked by: Azad T

Expert Reply:

Your 2012 Fleetwood Bounder is built on a Ford F-53 chassis which means that it is pre-wired for a brake controller. The correct harness to use then is the # 3035-P.

For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional brake controller that senses the amount of braking the tow vehicle is applying and applies a proportionate amount to the trailer brakes.

The brake controller port is located on the left hand side of one of the steering column supports. The plug is gray in color, and you should be able to see it if you look to the right of the emergency brake release handle.

expert reply by: Jameson C