Parts Needed to Tow a Trailer with a 2009 Dodge Journey SXT
Updated 03/27/2017 | Published 03/23/2017 >
Products Featured in This Question
Question:
Hi : Im curious to know what parts I would need and how much they are to install a trailer hitch on my 2009 Dodge Journey SXT. I want to haul a camper trailer in the future and Id like a recommendation on what size to get. Any help is appreciated : Thank you
asked by: Elizabeth G
Expert Reply:
To tow a trailer with your 2009 Dodge Journey SXT you'll need a trailer hitch receiver, a ball mount, hitch ball, pin and clip, and trailer wiring.
The trailer hitch I suggest is the Draw-Tite Max-Frame # 75648 which is a 2 inch, Class III receiver. A 2 inch receiver will have a higher weigh capacity as well as more variety of accessories that can be used. I've attached a video of the hitch being installed for you to take a look at.
The Tekonsha wiring harness # 118474 plugs into the Journey's wiring behind each tail light. There's no wire splicing needed. There's a video of this install linked as well.
For a pin and clip to fit you can use # PC3 or if you'd like to have a locking pin you can use # BX8858.
You'll also need a ball mount and hitch ball. I've attached link of our selection of ball mounts for a 2 inch hitch receiver as well as an article to help you determine the correct rise or drop you may need. Once you choose a ball mount you can then choose a hitch ball to fit it.
One way to make choosing a ball mount easier is to go with an adjustable ball mount like the B&W Tow & Stow # BWTS10038B. It features the ability to be flipped under the hitch when not using it and will provide up to 5-1/2 inches of rise or 5 inches of drop.
I've also included links to some articles on towing that you might find helpful.
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- For Towing
- Class III
- 400 lbs TW
- 4000 lbs GTW
- 4000 lbs WD GTW
- 2 Inch Hitch
- 400 lbs WD TW
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media









Continue Researching
- Q&A: Does etrailer Trailer Hitch Receiver for 2018 Dodge Journey Include Fishwire
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Wiring Harnesses for a 2013 Dodge Journey
- Q&A: Replacement 4.4K Electric Brakes with Offset Mounting Bolt Pattern
- Q&A: Replacement Hub/Drums & Brakes to Replace AL-KO 7230 Hubs
- Q&A: Hub & Drum With Electric Brakes Replacement For AL-KO 8700 Hub
- Q&A: How to Tell if 2018 Dodge Journey Has LED or Incandescent Tail Lights
- Q&A: Does Curt Wiring Harness Work With 2010 Dodge Journey
- Article: How to Choose the Right Trailer Hitch Class
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: How to Measure for Trailer Hitch Drop
- Article: Brake Controller Installation: Starting from Scratch
- Article: Rust Prevention
- Article: My Trailer Hitch Doesn't Fit

