Optronics Drop In Cup Holder - Single Tier - 2-3/4" Tall x 2-7/8" Diameter
(57 reviews)
Price: $3.50
In Stock
Optronics Drop In Cup Holder - Single Tier - 2-3/4" Tall x 2-7/8" Diameter
Item # 302B
Our Price: $3.50
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (57)
- Q & A (0)
- Videos (2)
- Photos
Optronics Cup Holder - 302B
- Cup Holder
- Optronics
- Drop-In
- Black
- 2-3/4T x 2-7/8W Inch
- Drain Holes
- Plastic
This 2-3/4" tall cup holder drops into one of your vehicle's drink holders to secure cups and cans. Drain holes prevent excess liquid from gathering. Durable, black plastic construction.
Features:
- 2-3/4" Tall cup holder drops into one of your vehicle's drink holders to hold cups and cans
- Drain holes prevent excess liquid from gathering
- Simple application - just drop into existing vehicle beverage holder
- Durable, black plastic construction
Specs:
- Quantity: 1 cup holder
- Height: 2-3/4"
- Cup diameter: 2-7/8"
302B Optronics Drop In Beverage Holder - Single Tier - 3" Tall - 2-7/8" Diameter
California residents: click here
Video of Optronics Drop In Cup Holder - Single Tier - 2-3/4" Tall x 2-7/8" Diameter
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Optronics Drop In Cup Holder Review
Hello, neighbors. It's Brad here at etrailer, and today we're taking a look at the Optronics Drop In Cup Holder. Now this is gonna be great for your 12-ounce drinks, even water bottles will hold in, and if you have your taller, either 16, or maybe 20-ounce, or 24-ounce cans, we also have a taller option that's gonna hold those in place. A lot of cup holders in vehicles are designed to allow you to put a bunch of different size cups, whether it be a coffee mug, or a can, or energy drink, anything like that where they come in a bunch of different can sizes. So one size fits most is not really the case on a lot of these, and you end up having to make sure that you're holding onto your drinks over bumps or sharp turns, and that way they don't spill and create stains all over your vehicle. So when you have your factory ones, they have these rubber little bumpers here, and that's gonna kind of tighten this into place, but as you can see, this has the ability to flop out with minor effort here.
So what we have is the Optronics Drop In Cup Holder. It goes in, it fits almost factory there, and you can see this can sits in there, and it tightens it up at the bottom base, and that really keeps it from toppling over. You can see, I can move it around, but in order for me to get it to pop out, I'm really having to push. It really gives it that bump. So normal bumps in the road should keep your drink in place.
Now for your larger 16-ounce or larger energy drink cans, we also have something that's gonna work just as well, and that's gonna be the taller version of this, and that's gonna fit in this recessed, or sometimes you do have your tiered cup holders, and that's gonna really hold this in place and make sure that you're not toppling over your energy drink, and losing money in the process while driving. I was extremely skeptical of this product. It didn't seem like it would do a whole heck of a lot. Well, we have a test course here that simulates a lot of road bumps and going over it, we did a before and after of a water bottle to see how it actually performed. Surprisingly well.
Very well, in fact, it kept it in place over the constant bumps. So the product itself does work and installation is as easy as dropping it in. This can also be used on golf carts, four wheelers, boats, whatever you have where you're taking drinks with you. This is a great solution if your drinks are falling out..
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Wrong item was ordered
- Did not fit
- Product did not meet expectations
Customer Reviews
Optronics Drop In Cup Holder - Single Tier - 2-3/4" Tall x 2-7/8" Diameter - 302B
Average Customer Rating: 4.8 out of 5 stars (57 Customer Reviews)
This 2-3/4" tall cup holder drops into one of your vehicle's drink holders to secure cups and cans. Drain holes prevent excess liquid from gathering. Durable, black plastic construction.by: Laurie05/12/2022
I installed the holders yesterday and they are exactly what I expected to receive. I used two of the 4 bottom holes to screw the holders in the exact location that I wanted them. They are serving as a replacement for 3D printed PLA and ABS holders which cracked within 6 months of use. I hope that these do not crack.
Comments
The cup holder is durable as none of the cup holders had to be replaced after more than a year of use.
Laurie L - 05/15/2023by: Gary 07/10/2023
Description was correct. Cup holders was a perfect fit and twice the depth of the originals in my RV.
by: Peter 08/26/2023
The product was exactly what I was looking for, ordering was easy and shipping was quick. Thanks
by: Kurt10/29/2022
It is not the dimensions shown online. Online it is clearly shown as 2 7/8 inch inside diameter, but it is only 2 3/4 inch inside diameter.
Comments
As with most plastic made parts like this, there is going to be some slight variations in measurements. Typically the opening will measure approximately 2.87 inches across.
-- 
Jenny N - 11/03/2022by: Diane 05/10/2021
Need these to go in the center console where the previous ones broke. I also recovered the piece to make it look new. Matching chairs went to a new home and we bought new ones
Comments
Fits perfectly. ed into a console that fits in between our RV recliner chairs.
Diane - 05/12/2022by: Mark 05/22/2023
Fast shipping, nice fit, great price
by: Garry 05/17/2023
just what i needed
by: Laura 12/08/2020
I bought a few of these. I used them to install in a bench that I made to sit by the fire as cup holders, they have been outside in all the elements and have held up. I recommend this product!
Comments
Its been 2 years since I installed these into an outdoor bench. They are still just as good as day one! Highly recommend
Laura - 12/09/2021by: Elaine07/31/2020
We were very happy with this transaction from start to finish. The product is at the right price, it arrived timely, and it was perfect for what we needed. We installed them in our plastic adirondack chairs. No more putting our drinks on the ground! We would not hesitate to order from this company again.
by: Robert06/04/2022
etrailer is easy to use and very productive getting advice and fitment information
by: Larry03/28/2020
Exactly what I needed for making table for deck ! Only place I could find inserts that would fit 3” hole !
Will definitely shop here again when making this sort of project !
Photo attached
by: Leahy03/30/2021
Serves it's purpose! Holds up after a year of use just fine. I use it all the time to be able to put fast food drink cups in so they don't fall into my Mustang's cupholder! Great price too.
by: Thomas 07/14/2022
Fast service and afgortable
by: Randy 08/08/2020
I used these for cupholders in my truck console. Worked great.
by: Timothy 03/16/2020
Order arrived ahead of schedule and after looking it over I feel that I definitely got value on my dollar. I'm using these as drop in holders for some homemade poker tables and the quality is definitely more than I bargained on for the price.
I have more tables to build and I will definitely be ordering more of these!
by: Tj07/22/2020
Easy to use and perfect fit for soda cans. looking to add a few more that we could use for key holders and other misc items in our RV.
by: Tyrone02/02/2021
I bought two to utilize in my truck best little piece of assisted furniture! Ideal for normal cups size holding!!!
by: Rick A10/16/2021
These cups are an exact match for our party bus and they even have drain holes as an improvement. Thanks for the quick shipping as well!!!
by: Steven 07/14/2021
fit great in our theater seats in our c amper
by: Robert 07/22/2020
Worked as expected for my portable folding table.
by: Jason 07/21/2020
Fit perfect in our 2012 Wildwood 28SRV! Great quality, so much better than the ones it can’t with!
by: James 07/21/2020
The product was exactly as described and was delivered on time.
by: Shana08/24/2020
Great item that fit exactly as promised in our existing poker table.
by: Felisa08/24/2020
Good quality. They fit perfectly on the dock bench.
by: Timothy 08/25/2022
Nice
25
57
Show More Reviews
See what our Experts say about this Optronics Cup Holder
- What is the Diameter of the Top of the Optronics Drop In Cup Holder?The top diameter, including the lip, of the Optronics Drop In Cup Holder # 302B is 3-1/4" across, which is going to be slightly larger than the 3-1/6" opening on your 2020 Subaru Legacy, so this cup holder will work for you.
view full answer...
- How To Determine Fit of the Optronics Drop In Cup HolderThe Optronics Drop In Cup Holder part # 302B is not a vehicle specific component so I would not be able to confirm compatibility. That said, most cup holders are a standard size so you should not have any fitment issues. If you want to confirm then make sure the inner diameter of your existing cup holders measures at least 2-7/8" diameter.
view full answer... - Dimensions Of Optronics Black Beverage HolderThe outer diameter of the Optronics Black Beverage Holder # 302B is right at 2 7/8 inches. The overall height from the bottom to the very top is 2 3/4 inches.
view full answer... - What Replacement Cup Holder Do You Recommend that Does Not Narrow at the Bottom?The only console-style cup holder that we have that is close to the diameter you are seeking without narrowing at the bottom is the 2-7/8 inch diameter Optronics Drop In Cup Holder # 302B. The Optronics cup holder is designed to drop into your current Optronics Drop In Cup Holder with Handle Rest # 09017101B. However, you will still an open cavity on your current cup holder. Unfortunately, we do not currently have something that can cover that opening. If you are looking for something...
view full answer...
Do you have a question about this Cup Holder?
Info for this part was:
Installed by:
Jeff D
Installed by:
Bradley B
Video Edited:
Dustin K
Written by:
Amy B
Updated by:
Brian T
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.