Solution for Finding Hub to Fit Shorter Spindle with Outer Diameter of 1.06 inches
Updated 02/20/2017 | Published 02/18/2017
Question:
I have a trailer from 1980. Spindle is 1 1/16. The length of the spindle is 2 1/2 inches. I cannot find a hub that doesnt cover the threads od the spindle.
asked by: Robert O
Expert Reply:
Sounds like you have BTR spindle but have the much shorter version which we don't have hubs for. It would be time for a new spindle realistically like the part # TRU44FR.
To replace a spindle, the old one would need to be cut off, and the new one welded into place. This is NOT a job for the do-it-yourselfer. The new spindle must be absolutely square with the axle in order to prevent premature tire wear and wheel tracking problems. I would recommend finding a welder who is experienced with trailer axles. Your local RV dealer or repair facility could probably refer you.
Product Page this Question was Asked From
BTR E-Z Lube Spindle for 2,000-lb Trailer Axles - 1-1/4" Diameter
- Trailer Spindles
- EZ Lube Spindle
- Without Flange
- L44649
- 1-1/4 Inch Diameter
- Round
- For 2000 lb Axle
- TruRyde
more information >
Continue Researching
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: Replacement Hub and Spindle for Dexter 69-46 Axle
- Q&A: What are the Diameters of the CE Smith Spindle Axle CES38WR?
- Q&A: Replacement Hubs for 2000 Coleman Sedona
- Q&A: Replacement Hub and Bearings for 1989 Tracker Boat Trailer
- Q&A: What is Difference Between Trailer Bearings L44649 vs L44643
- Q&A: What Are Dimensions Of The BTR E-Z Lube Spindle for 2,000-lb Trailer Axles TRU44FR?
- Article: Trailer Wiring Diagrams
- Article: Most Popular Wheel Bearings
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: How to Measure Your Trailer Wheel Bolt Pattern