Where is Running Light Relay on 2014 Nissan Frontier
Updated 01/23/2017 | Published 01/22/2017 >
Question:
Two of my trailer light bulbs were blown but the blinkers and brake lights would still work. I had no running lights. So I changed the bulbs but still no running lights. I checked the trailer using a battery and everything worked so I know the problem is with my vehicle. I have a 2014 Frontier. I have the towing package there for the wiring harness is not in the kick panel like the ones you guys have for sale. Everything is under the hood. There are two blue relays and two brown relays. Ive checked every fuse in the vehicle and it is good. Im wondering if one of the relays have gone bad. I even located the blue relay under the steering wheel. I would have never even known about that one without looking on your website. Well I changed out the blue relay with one from under the hood and still no running lights. Everything works except for the running lights. Maybe one of the brown relays under the hood has gone bad. I dont know much about all of this but my thoughts are the brown relay probably goes to the brown wire that provides power to the running lights. If that is the case maybe my relay has gone bad. I just cant find any more fuses hidden anywhere that could possibly be the problem. If you think the brown relate maybe the problem can you please send me a link to purchase one. If the brown relay has nothing to do with the running lights then I just dont know what else to do. I did locate a black relay just above the blue relay under the dash but I cant find any information about that one so Im not messing with it. Its a little bit hard to get to but it is possible if I had to. I guess to make a long story short, could I purchase the wiring harness with the relays and install it in my kick panel even though I already have Factory tow package? Maybe that would just be a quick fix. If so would I have to remove any existing relays that are currently on the vehicle that control the towing?
asked by: Stephen
Expert Reply:
In the passenger side pick panel will be a harness that has a blue relay on it. That is the one that is used for the trailer running light circuit.
I attached a picture of where the relay would plug in. If you need a replacement, we the blue relay in the Curt Relay Kit # C57000.
Product Page this Question was Asked From
Curt Relay Kit for Nissan Armada or Titan Aftermarket Tow Package
- Accessories and Parts
- Trailer Wiring
- Relays
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Shop: Curt Relay Kit for Nissan Armada or Titan Aftermarket Tow Package
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Q&A: Trailer Running Lights Not Working with 2014 Nissan Frontier
- Q&A: 2022 Nissan Frontier SV - Troubleshooting No Running Lights On Trailer
- Q&A: Troubleshooting Trailer Running Light Circuit of 2018 Nissan Frontier Not Active
- Q&A: Installation of Towing Relays for 2018 Nissan Titan XD
- Q&A: Solution for Trailer Running Lights Not Working on 2012 Nissan Frontier with Tow Package
- Q&A: Recommendation of Brake Controller for 2009 Nissan Titan to Activate Electric Brakes on Car Hauler
- Q&A: Trailer Running Lights Not Working on 2012 Nissan Xterra
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams
- Article: Brake Controller Installation: Starting from Scratch
- Article: Trailer Hitch Balls
- Article: Top Weight Distribution Hitches for a Buttery Smooth Ride
- Article: Trailer Tire Sizing
- Article: Trailer Lighting Requirements



