Is A Mounting Bracket And Wiring Needed For The Optronics Trailer Light # MC65AB
Updated 12/27/2010 | Published 12/26/2010 >
Products Featured in This Question
Question:
will be surface mounting on trailer frame, can I mount these lights directly or do I have to order accessory black bracket and single wire plug for thin line series ?? Also does this light have 2 wires, power and ground or does it use the mounting connection as the ground ?
asked by: Mike W
Expert Reply:
The Optronics Trailer Light, part # MC65AB, will need a mounting bracket and single wire plug like the Optronics Black Bracket and Single Wire Plug, part # A65PB. The trailer light will not mount directly to the trailer without a mounting bracket.
The # MC65AB trailer light does not have any wiring. When this light is mounted to the # A65B mounting bracket it will ground through the mounting hardware and the single wire plug on the bracket will be used for the power lead.
I also have the mounting brackets for the trailer light available in gray ( # A66PB) and chrome ( # A67CB).
Product Page this Question was Asked From
Optronics Incandescent Trailer Clearance and Side Marker Light - Submersible - 2 Bulbs - Amber Lens
- Trailer Lights
- Clearance Lights
- Marker
- Rectangle
- Surface Mount
- Submersible Lights
- Incandescent Light
- 3-15/16L x 1-1/4W Inch
- Amber
- Optronics
more information >
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Replacement Fan Blade and Motor To Replace D-Shaft Style of Ventline Motor
- Q&A: Mounting Bracket Options for Optronics Sealed, Thin Line Clearance Side Marker Light # MC65AB
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Will The Draw-Tite 75521 Fit A 2007 GMC Sierra Classic 1500 With Aftermarket Bumper?
- Q&A: Recommended Hitch for a 2022 Lexus NX 450h+
- Q&A: Does TRC Small Edge Trim Require Adhesive or Wire to Install
- Q&A: Butyl Tape To Seal Trailer Roof Panel Joint
- Article: What are the Common Types of Propane Fittings Used on RVs?
- Article: How to Install E-Track in 3 Easy Steps
- Q&A: Determining If We Have A Replacement For A Dayton Fayette 9254 Hub and Drum Assembly
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: Brake Controller Installation: Starting from Scratch
- Article: How to Accurately Measure Trailer Leaf Springs

