Replacement Orifice Fitting For A Titan Disc Brake Actuators
Updated 07/29/2022 | Published 07/27/2022
Question:
hello, Im in the process of changing my master cylinder and the straight brass fitting between the actuator and master cylinder is seized into the old master cylinder. do you have the fitting thread pitch, size or part number? my actuator is still in good condition.
asked by: Scott N
Expert Reply:
I can't say for certain, as I do not know what actuator or master cylinder you have, however if you have the Titan Disc Brake Kit and Leverlock Actuator w/ Electric Lockout T4843100, which is no longer available, then the correct fitting you're looking for is the:
-Replacement Brass Connector for Titan Disc Brake Actuators # T4750300.
This is a 1/8" to 3/16" fitting and will also work with the Model 10, Model 20, Model 6, Model 60, Model 60 ZX7000, and Aero 7500 Swingaway actuators.
Product Page this Question was Asked From
Replacement Brass Connector for Dexter Disc Brake Actuators - Qty 1
- Accessories and Parts
- Brake Actuator
- Trailer Brakes
- Disc Brakes
- Brake Lines
- Brake Line Fitting
- Brake Line Components
- Dexter
more information >
Continue Researching
- Search Results: disc brake conversion
- Search Results: boat trailer guides
- Search Results: l44649
- Search Results: l68149
- Video: Detailed Breakdown of the DeeMaxx Trailer Idler Hub for 3,500-lb Axles
- Video: All You Need to Know About the Kodiak Disc Brakes
- Video: The Low-Down on the Kodiak Disc Brake Kit
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Q&A: Compatibility of 168255TB Grease Seal with Dexter 8-248-50 or Kodiak Q-HUB84545 Trailer Idler Hub
- Q&A: Recommended Replacement Hubs for Boat Trailer
- Q&A: Parts Needed To Upgrade Drum Brakes on Boat Trailer to Disc Brakes
- Q&A: Dexter Hub Vs. Kodiak Hub Comparison
- Q&A: Replacement Hub Recommendation for Trailer with L44649 Bearings, and L44649 and L68149 Bearings
- Q&A: Replacement Seals and Castle Nut for 2000-lb Dexter Axle with EZ-Lube Spindles and 5-Lug Hubs
- Q&A: Which Idler Hub For Kodiak Slip On Disc Brake Kit With 10" Rotors and 5 Lug Bolt Pattern
- Shop: Dexter Bearing Kit for 1-1/16" to 1-3/8" Tapered Spindle
- Shop: Replacement Solenoid Valve for Dexter Brake Actuators with Reverse Lockouts
- Shop: Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Dacromet and KodaGuard - 3,500 lbs
- Shop: Replacement Trailer Hub Bearing - L44649
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Shop: Timken Replacement Trailer Wheel Bearing - L68149
- Shop: Kodiak Trailer Hub for 3,500-lb Axles - 5 on 4-1/2 - Stainless Steel
- Video: Titan Brake Actuators with Reverse Lockout Replacement Solenoid Valve Installation
- Video: Comprehensive Review: Replacement Brass Connector for Dexter Disc Brake Actuators