Could Timbren Axle Less Suspension System be Used on Fish House Trailer Suspension

Question

Question:

I was wondering if you have sold any of the axle-less trailer suspensions for fish house suspensions. Looking at the 5,200# one with the 4inch to go on a 20foot fishouse. Thank You

asked by: Casey H

0

Expert Reply:

I looked up some fish house suspension setups and there really isn't a reason you couldn't use the Timbren Axle-Less System part # ASR5200S04 on a fish house trailer

expert reply by: Jameson C

0

Answer 1

Yes. You do want to inflate the Loadstar K399 Bias Trailer Tire #AM1HP28 to 70psi, as tires like these should always be inflated to the recommended pressure to ensure the maximum load carrying capabilities.

view full answer...

Answer 2

For an industry-standard round tube jack the largest caster wheel we have is a 6-inch size made for a 2-inch trailer jack inner tube, like the Dutton-Lainson part #DL22539 you referenced. Most such caster wheels are rated for 1200-lbs. This and…

view full answer...

Answer 3

For your swivel jack, I recommend the Bulldog Round, Snap-Ring Swivel Jack - Bolt On - Topwind - 10" Lift - 2,000 lbs #BD151443. This will give you the ability to use a caster wheel like #BD500245. For a footplate you can use #BD018564. These…

view full answer...

Answer 4

I was not able to obtain a 3D model or CAD drawing for the etrailer Round Swivel Marine Jack w/ Wheel #MJ-1500B referenced in your question. I did attach an image with some basic dimensions labeled that you can take a look at. Please also let me know…

view full answer...

Answer 5

One way to determine the lift and jack height you need would be to measure the jack you currently have on your 2018 Intech Luna RV. If this is not possible, or you still aren't sure, you can also determine the correct jack using the coupler…

view full answer...

Answer 6

For a boat that weighs 2,500 lbs the Dutton Lainson TW4000 part #DL25200 would be the most appropriate choice. The Fulton F500620 has a 7,000 lb capacity and would work great but would be quite a bit more than you'd need. The DL is a very popular…

view full answer...

Answer 7

The proper size hub for the 215/60-8 bias trailer tire and wheel, #AM3H325, is going to depend on the weight capacity of the trailer you are designing. This wheel and tire combination is capable of 1,165 lbs at 70 psi, so each axle in your design…

view full answer...

Answer 8

You are correct, the older tire size of 18.5 x 8.5 - 8 now translates to the current metric tire size of 215/60-8. When it comes to 215/60-8 tire on a 4 bolt wheel, we have two options for you, the Kenda 215/60-8 Bias Trailer Tire with 8 Inch White…

view full answer...

Answer 9

I have a solution for you because as you know what you have now cannot charge Lithium batteries. You will need the Progressive Dynamics #PD4135K which is designed to replace your WF-8735P and is compatible with Lithium batteries. When this is…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Could Timbren Axle Less Suspension System be Used on Fish House Trailer Suspension

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching