Installation of Curt T-Connector Wiring Harness on a 2017 Ford Escape

Updated 09/19/2016 | Published 09/18/2016

Products Featured in This Question

Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(135)

$71.73

Powerbuilt Trim Pad Remover

(576)

$16.90

Hook Probe Circuit Tester

(61)

$13.33

3/32" Titanium Drill Bits - Qty 2

(2)

$5.00

Question:

how to remove panels and light assembly for wiring. thanks

asked by: Dale S

Expert Reply:

While we have not had the opportunity to install this wiring kit on a 2017 Ford Escape, I do have the installation instructions, which I've attached, that will show and tell you exactly what is needed to install the Curt wiring harness # C56320 to your 2017 Ford Escape. The # C56320 is a confirmed fit for your 2017 Ford Escape.

You will need a trim panel remover like # ALL648544 to remove the panels. You will also need 8mm socket and ratchet or 8mm Wrench, Drill (3/32” Drill Bit) # PTW8563, 1/4-inch socket, wire crimpers, wire cutters, Philips Head Screwdriver, and a Test-probe like # PTW2993.

I have linked the above-mentioned products and the installation instructions to this page for your convenience.