High Capacity D-Ring Recommendation for Enclosed Trailer
Updated 09/19/2016 | Published 09/17/2016 >
Products Featured in This Question
Question:
I need advice on selecting recessed D-ring for my toy hauler. I am adding some to install the Bolt-it-On motorcycle rack system. The existing D-rings in my 2016 Forest River Shockwave toy hauler are bolted into the metal frame under the floor, which is how I want to mount the new ones - very convenient to install, and secure. But the frame member is to narrow for a four-bolt pattern - the bolts have to be in-line, and the existing D-rings are very similar to the Brophy RR01-C that you carry. I would like something similar in-line holes but with welded not just pressed together D-ring I have had two of these fail when the D-ring pulled apart. Do you have any recessed D-rings with in-line bolt holes that have welded D-rings, or just higher working load limit than the RR01-C?
asked by: Jim M
Helpful Expert Reply:
Your best solution will be the # LRB1. This D-ring anchor has a 4,000 lb working load limit, has mounting holes that are in line and has a continuously welded D-ring.
I attached a review video for you to check out as well.
Product Page this Question was Asked From
Brophy D-Ring Tie Down Anchor - Bolt-On - 3-9/16" Wide - Recessed Mount - 400 lbs
- Trailer Tie Down Anchors
- D-Rings
- Universal
- Zinc-Plated Steel
- 400 lbs
- Bolt-On
- Folding
- Recessed Mount
- Brophy
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: kodiak hydraulic brake hose
- Q&A: Weight Capacity Rating of Brophy D-Ring Tie Down Anchor RR05
- Shop: Kodiak Hydraulic Brake Hose - FIF and 90-Degree Male Fittings w/ Stainless Flares - 1.5'
- Q&A: Looking for Draw Tite Hitch for 2021 Dodge Durango
- Q&A: Wheel Center Cap for Aluminum Liger Trailer Wheel
- Q&A: Reasons Why Wheel Studs Would Shear Off
- Q&A: Can The Caliber D-Rings Be Mounted Vertically On A Flatbed?
- Q&A: Error on Display After Jack Removed from Lippert Ground Control Leveling System
- Q&A: How To Choose the Correct Replacement Rear Jack for a Lippert Ground Control Leveling System
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Trailer Wiring Diagrams
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: Trailer Maintenance Schedule
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs


