Replacement Hubs for 1994 Coleman Destiny Pop-Up Camper Trailer
Updated 07/25/2016 | Published 07/23/2016
Products Featured in This Question
Question:
I have a 1994 coleman destiny royale. Id like to replace the hubs, but Im not sure which size I need. The axle is 2200 pounds, the bolt pattern is 5 x 4 1/2, and the bearings are L44649. The tire is 5.30-12. I tried replacing the bearings but I cant get the races out. I thought replacing the hubs might be easier. Thanks!
asked by: Jim K
Expert Reply:
Thank you for providing the details about your 1994 Coleman Destiny's axle and hubs. It is often a lot easier to just replace the complete hub than to pry out the old bearings and races and to re-install everything. New hubs also give you the confidence that comes from knowing all your components are new and in good shape.
On the page I linked you can view all compatible idler hubs in your 5-on-4-1/2 bolt pattern that are rated for a 2200-lb axle. All of these idler hubs use your L44649 bearing set.
For example, galvanized idler hub part # 8-259-50UC1 works on 2200-lb axles, shares your bearing set and bolt pattern and includes races, bearings, grease seal, grease cap and lug nuts. This hub will fit your 12-inch wheels.
You may care to use marine-grade bearing grease # L54FR to re-pack your bearings.
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Idler Hub
- Standard
- L44649 / L44649
- Marine Grade
- For 2200 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 8 Inch Wheel
- 9 Inch Wheel
- 10 Inch Wheel
- 11 Inch Wheel
- 12 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Video: Let’s Check Out the CE Smith Deep V Keel Roller Assembly for Boat Trailers
- Search Results: bt150a
- Search Results: short hub
- Shop: Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2 - Qty 2
- Search Results: hub nut
- Search Results: 1250 inch id trailer bearings races seals caps
- Search Results: hub washer
- Shop: Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: Kenda 5.70-8 Bias Trailer Tire with 8" Galvanized Wheel - 5 on 4-1/2 - Load Range D
- Q&A: How to Determine Correct Replacement Hub for Coleman Pop-Up Camper
- Search Results: spare tire carrier
- Shop: Kenda 5.70-8 Bias Trailer Tire with 8" White Wheel - 5 on 4-1/2 - Load Range C
- Q&A: Replacement Hub and Spindle for 2014 Ranger Trailer
- Q&A: Recommended Hubs for a Snowmobile Trailer With 8 Inch Wheels
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Galvanized
- Search Results: 1500 lb axle
- Shop: Trailer Wiring
- Shop: Trailer Hitch
- Shop: Loadstar 5.70-8 Bias Trailer Tire with 8" Galvanized Wheel - 5 on 4-1/2 - Load Range C
- Article: How to Raise Your Travel Trailer Height
- Q&A: How to Select Replacement Hub for Fleetwood Coleman Destiny Pop-Up Camper
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Video: Torflex Lift Kit Feature Review
- Q&A: Recommended Tires For 1994 Coleman Destiny Cedar XL With 5.30x12 Tires
- Q&A: Comparing a 5.30x12 and 5.70x8 Trailer Tire
- Q&A: Replacement Hubs for a Triton 08351 PWC Trailer Axle
- Article: Where to Position the Trailer Axle?