How Can I Connect a 7-Way Wiring Harness to My 2010 Chevrolet Traverse

Published 07/22/2016

Products Featured in This Question

Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(166)

$31.83

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

(1792)

$160.94

etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs

(1376)

$80.11

Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires

(3401)

$106.82

Question:

I have a 2010 Chevy Traverse, I need to add a 7-way trailer plug. it doesnt have the tow package that I know of. Will this need a t-one connector and then add the 7-way

asked by: Mick C

Expert Reply:

Yes you will need a T-Connector Wiring Harness with a 4 Pole Flat Trailer Connector # C56027 to connect to a 7-way. If you're planning to use a brake controller with your Traverse you will need the Universal Installation Kit for Trailer Brake Controller - 7-Way and 4-Way Flat # ETBC7. This will be all of the wiring you'll need for the brake controller.

I've included an installation video of the wiring on a 2011 Traverse which will be very similar to
yours.

If you don't have a trailer hitch already, a compatible hitch for your Traverse is the Draw-Tite Max-Frame Trailer Hitch Class III # 75528 and Ball Mount Kit # 989900. Included with the ball mount kit is two ball mounts with different rises and drops, two hitch balls, pins and a carrying bag for all of it.

I've also attached a couple of Help Articles that may be useful to you.