Replacement Hubs for Jet Ski Trailer with Bearings that have Inner Diameter of 1-1/6 inch
Updated 07/18/2016 | Published 07/16/2016
Products Featured in This Question
Question:
Im in the need for 4 wheelhubs bearings and races for a jet ski trailer! I cant read the numbers on the bearings anymore? The inside diameter of the bearings AR 1 1/16 of an inch. Would you know which ones I might need? Any help is greatly appreciated! Thanks.
asked by: Joe W
0
Expert Reply:
We have just what you need based on the inner diameters of the bearings of your hub.
If your hub has 4 wheel studs you would want the part # AKIHUB-440-2-2K or if your hub has 5 wheel studs you would want the part # AKIHUB-545-2-2K.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44649 Bearings - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L44649 / L44649
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: How Far Apart Are The Bolt Holes On etrailer Scissor Jacks e56VV ?
- Q&A: Is There a Trailer Bearing with Inner Diameter of 1-3/16"
- Q&A: Solution for 8" Replacement Wheels With 4 x 3.75 Bolt Pattern
- Q&A: What Does Load Range C Mean for Trailer Tires
- Q&A: Is Norcold 12V RV Mini Fridge A Good Choice For Lance Truck Camper Off-Grid
- Q&A: Hubs for 1" Straight Spindle With 5 on 4-1/2 Bolt Pattern Using 13" Wheels.
- Article: Trailer Wiring Diagrams
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Article: Most Popular Wheel Bearings
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Slipper Spring Trailer Suspension System Review
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Measure a Trailer Axle