Troubleshooting Lippert Ground Control 3.0 That Works But Rear Lights Flash While Operating

Updated 06/28/2016 | Published 06/25/2016

Question:

Whenever I turn my system on both of the right and rear lights flash. The system seems to work properly even with the lights flashing. The lights just started flashing when I turned the system on so I could disconnect my fifth wheel after a camping trip. So my question is what should I do to correct this problem? Thanks

asked by: Larry A

Expert Reply:

I spoke with my contact at Lippert and he informed me that the lights flashing indicate the low point of the coach and that if you perform a zero point calibration you will correct that.

In the service manual you will need to follow the instructions for Homing Jacks and Zero Point Calibration on page 10. I attached a link on this page that will take you to the manual. Plus screenshots from the instructions that detail how to do the zero point calibration.

expert reply by: Jameson C