Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Designed to work with most scissor jacks, this unique socket is used with your power drill to extend and retract your jack up to 10 times faster than with a manual crank. Works with 3/8" drill bits.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today, we're going to be taking a look at the Ultra-Fab speed socket power drill adapter for scissor jacks, part is UF48-979005.Here's what your adapter is going to look like. It's really straight forward setup. This is going to work with any drill that has a minimum opening of 3/8 of an inch, or it can even go into 1/4 inch bit drivers, so it's a pretty versatile setup. Basically, we're going to place it in whatever power tool we want to use, tighten that chuck down, it goes down on it. Then, we can operate our jacks.One thing to keep in mind, if you are backing the screw out, what would traditionally be loosening, that's going to lower the jack. If you go into the tightening, or if you turn it towards the right, that's going to raise the jack.
We'll start with it in reverse. You can see, that's going to be much quicker, much easy, and more simple, than using that hand crank. Especially when it gets hot, the humidity's up, bending over for an extended period of time is not something you want to do. This has been designed to work with the Ultra-Fab scissor jacks, of course, but it'll work with any scissor jack that uses a 3/4 inch socket, here on the end. Now, to raise it back up, would be the opposite process.
Turn our drill so it's tightening, and you can see right up in that stored position.Now, some scissor jacks are going to have a pin that goes through a circle, or there's going to be a flattened tab with a hole in it for J hook to go in. This isn't going to work for those applications, so that's something to keep in mind. That'll complete our look at the Ultra-Fab speed socket power drill adapter for scissor jacks.
Average Customer Rating: 4.9 out of 5 stars (161 Customer Reviews)
Designed to work with most scissor jacks, this unique socket is used with your power drill to extend and retract your jack up to 10 times faster than with a manual crank. Works with 3/8" drill bits.
You need this on scissor jacks with your impact wrench
Good product, hard to get up and down
Great! Thank You
exactly what i expected
Works as designed!
If you have or use scissor jacks under your RV, you'll love this accessory. Just insert it in your cordless drill and in seconds you'll have your jacks extended or retracted. This is a must have! Having a hand crank in addition is also a must to tweak the jacks extension height or if your drill battery dies.
Excellent product - it was just what I needed - thanks for the quick service - this will be a real benefit to me as I have had a stroke and need the assistance in lowering my trailer jacks ... suggest and add-on of axle grease for the jack screws..
Steve C.
5/27/2018
Works great - used several times - so much easier to set up the trailer now
Just good.
Just the right amount of extension to more easily deploy my leveling jacks.
William C.
5/6/2019
Still does the job.
Couldn't do without this tool. Makes operating the trailer stabilizers quick and easy.
Erik D.
12/24/2018
works great!
I am very happy with the Ultra-Fab Speed Socket Power Drill Adapter for Scissor Jacks. It works just as advertised. I own a cordless impact driver and experimented with chucking up a 3/4" socket to raise and lower the jacks. Don't do it that way! You stand in jeopardy of damaging the jack. Using a convention cordless drill-driver to slowly spin the fitting still requires caution, but is much better. Just remember; once the jack makes contact with the ground, switch over to hand cranking the last few revs. to firm up.
This socket saves a ton of time setting up and taking down my stabilizer jacks with the drill that I keep in my trailer. I can recommend it to anyone who would rather spend their time playing when camping instead of working.
I bought 2 sets of the 24" ultra-fab scissor jacks and the speed socket. My small 12v cordless drill runs these up and down just fine.
I am looking forward to the reduced movement in my large fifth wheel trailer while these jacks are deployed.
Great fit!!!!
This well made adapter is perfect for using my cordless drill to lower & raise our stabilizer jacks.
It's well made and very reasonably priced.
I use this in my drill to quickly adjust the weight distribution on my Hensley hitch. Saves time and effort a wrench would require.
Another great order from etrailer.com. My ordering was simple, the shipping was much faster than expected. The communication from them was solid, every step of process someone sent me an update.
Extremely happy with this supplier.
1. The product is excellent! The product information says it is 10 times faster. I say 20 times faster and takes 0 effort. No more squatting over, cranking away in the heat and humidity. 5 seconds with a drill and Bam!
2. Etrailers price was excellent.
3. I used the more inexpensive of the 3 shipping options, which was $8 and it arrived in only 3 days.
Thank you Etrailer. This is my second purchase from Etariler and I will always check with Etrailer first.
This is a life safer for me. Using the drill adapter attached to a portable electric drill makes lowering and raising the four stabilizers on my trailer a breeze. No stress on my back or knees being bent over for what at times seems forever cranking by hand.
Easy to mount
Thank you for promptly packing and shipping my order. It arrived a day earlier than expected!
This product will be a BIG help lowering and raising the RV stabilizers. You offered the best solution at the best price - plus outstanding delivery!
This power drill adapter is the perfect complement for our new Ultra-Fab Ultra Scissor Jacks!
Great 2nd socket to have as a spare.
Works as advertised. Not much to rate as this is basically just a socket driver for a drill, but the shipping was fast and this was a convenient item as an add on to another larger sale more unique to etrailer. Transaction was flawless as etrailer always seems to do online sales well.
Great service as usual. Shipped out right a way and was delivered in 2 days. The stabilizer jacks and the socket bit are very good quality.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Garys_nc
8/14/2022
This is an absolute must have!. It makes running them and taking them down a breeze.