Can Square Trailer Axle Be Replaced with Round Axle
Updated 06/17/2016 | Published 06/16/2016
Products Featured in This Question
Question:
I have a trailer axle that is 2 inches square. Can I replace it with the round 1-3/4 if it is still rated at 2000 lbs?
asked by: Jane K
Expert Reply:
Yes, you can replace a square axle with a round beam axle so long as it is rated appropriately. You will need a new u-bolt kit for the round 2K axle, part # APUBR-10.
We offer beam axles rated up to 3500-lbs and also axle-less suspension kits from Timbren that bolt right on to the trailer frame. You can see all 2K axle kits by clicking on the link provided. Some of these come with hubs while others do not.
For instance Timbren kit # A20RS545 includes the bolt-on suspension units (they can be welded if you prefer) along with spindles and idler hubs with the popular 5-on-4-1/2 bolt pattern. Bearings, seals, etc. are included.
For a 60-inch beam axle with 4-on-4 idler hubs we offer Dexter kit # 20440I-ST-60.
Product Page this Question was Asked From
Dexter Trailer Axle w/ Idler Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Idler Hubs
- 3500 lbs
- 5 on 4-1/2 Inch
- 74 Inch Spring Center
- 89 Inch Hub Face
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: drum
- Search Results: wheel
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Grease Seal - Double Lip - 2.250" ID - 3.376" OD - GS-2250DL
- Search Results: 225/75~15 trailer tires and wheels
- Search Results: hydraulic drum brakes trailer brakes
- Search Results: ktc7600
- Search Results: 60zx7000
- Search Results: valve stem
- Shop: Replacement Rubber Snap-In Valve Stem - 1-1/2" Long - Up to 100 psi
- Video: Ultimate Overview of the Optronics LED Combination Trailer Tail Lights
- Q&A: Replacement Tail Lights for a 2008 Featherlite 4926 Car Hauler Trailer
- Q&A: Ramp/Door Spring Recommendation for 2011 Homesteader Enclosed Trailer
- Q&A: Cross Reference Chart for Kodiak Trailer Disk Brake Pads to Automotive Applications
- Shop: Brake Controller
- Shop: Kodiak Ceramic Brake Pads - 7,000 lbs to 8,000 lbs
- Shop: Replacement Master Cylinder Assembly for Dexter Model 60 and Aero 7500 Brake Actuators - Drum
- Shop: Dexter Zinc-Plated Brake Actuator - Drum - Multi-Fit Ball - Bolt On - 7,000 lbs
- Shop: Cam-Action Lockable Door Latch for Fold Down Trailer Gate or Side Door - Zinc Plated Steel
- Video: What to Know About the Rambler ST145/R12 Radial Trailer Tire
- Video: All You Need to Know About the Dexter Trailer Springs Over-Under Conversion Kit
- Shop: Fifth Wheel Hitch
- Q&A: Can Round Trailer Axle be Replaced with Square Trailer Axle
- Video: Let’s Check Out the CE Smith U-Bolt Kit for Mounting Round Trailer Axles
- Q&A: Does the Dexter Trailer Springs Over-Under Conversion Kit Require Welding
- Q&A: Can I Use JB Weld On Spring Seats in Over-Under Conversion Kit
- Video: Review of the Kenda Karrier S-Trail ST145/R12 Radial Trailer Tire
- Q&A: Can Trailer Axle be Replaced with One that Has Longer Hub Face Length
- Shop: Trailer Wiring
- Shop: Trailer Hitch