Solution for Removing RV Plastic Hub Covers that Attach to Lug Nuts

Question

Question:

On the plastic hub covers that fit over the rv so wheels, how do you get them off. Says they snap over the lug nuts, how do you unsnap them? Thanks,

asked by: Don

1

Helpful Expert Reply:

The Wheel Masters Lug Nut Cover Pliers, part # WM8211, are designed to remove any size lug nut covers. Just pinch the lug nut cover with the pliers and pull the cover off.

expert reply by: Jameson C

1

Answer 1

Hey John, the #SN39FR is specifically designed for for 5-1/2 inch BAL Power C jacks and is a set of 4, so that's what I'd recommend using plus two more of the part #SN67FR which is these pads individually for a set of 6. How do you like the…

view full answer...

Answer 2

The SnapPads #SN39FR that you referred to are 5-1/2" in size and your metal pads are 5-3/4", so your feet are too big for the pads. You will need the #SN99FR pads designed for metal feet 5-3/4" to 6". Please measure all 4 feet…

view full answer...

Answer 3

Yes, we have the Replacement Key G384 #295-000163. This will fit Global Link door and baggage locks that accept the G384 key.

view full answer...

Answer 4

Yes, the Wheel Masters Lug Nut Cover Pliers, part #WM8211, are designed to remove any size lug nut covers. Just pinch the lug nut cover with the pliers and pull the cover off.

view full answer...

Answer 5

The Wheel Masters Lug Nut Cover Pliers #WM8211 is designed to remove the lug nut covers on a RV. We have used sockets to remove the covers in the past but using this tool lessens the chance of damaging the finish.

view full answer...

Answer 6

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 7

To replace your Dometic Thermostat you will want to use the Replacement Single Zone Thermostat for Dometic RV Air Conditioners item #DMC79FR you were looking at. It does indeed control both the furnace and the air conditioner. I have attached a…

view full answer...

Answer 8

Yes, the Dexter Nev-R-Adjust Brakes #23-468-469 drum brakes will work on your Lippert 3,500 pound axles as long as you have 14 to 15 inch diameter wheels. As far as replacement seals for your axle, I recommend the Grease Seal - Double Lip - ID…

view full answer...

Answer 9

Hey Denny, based on the serial number of your roof vent lid the correct replacement would be the part #BVE0108-03 which is the same smoke color you have now.

view full answer...

Answer 10

The correct replacement for your 1-065-041012-01 motor is part #LC141893 from Lippert. Your original motor had a 7140 rpm speed. The Stromberg-Carlson #LG-196308 you specified has a 5430 rpm output, so it wouldn't be a good choice. You'll…

view full answer...

Answer 11

Hey Candido, thanks for the picture of your shackles. Based on that you have a 2-1/4 inch long shackle length which is very common so for an upgrade kit that includes much thicker shackles, wet bolts, and bronze bushings we have the part #MR46ZR.…

view full answer...

Answer 12

To know if the Phoenix USA Lug Nut Cover for 33mm Lug Nuts #PXSP33 will fit the lug nuts on your 2021 Tiffin Allegro Bus Motorhome you'll need to measure the diameter of the lug nuts. This lug nut cover fits 33mm lug nuts. If you find a different…

view full answer...

Solution for Removing RV Plastic Hub Covers that Attach to Lug Nuts

Product Page this Question was Asked From

Continue Researching