Bearing Buddy Recommendation for 5,200 lb Axle Kodiak Rotor Hub
Updated 05/20/2016 | Published 05/16/2016
Products Featured in This Question
Question:
I see nothing about the size of the dust cover/cap for this khr12d hub. will the 2441 bearing buddy work? Also, will the dust driver tool 290-992 work with the 2441 bearing caps.
asked by: JErry
Expert Reply:
The correct bearing buddy for the Hub part # KHR12D that you referenced would be based on the 15123 outer bearing that the hub uses. Based on that you would want the Bearing Buddy part # BB2441.
Installing the Bearing Buddy is pretty easy and would not work with the tool you mentioned. I have included a link to a video and if you fast forward to about the 5:20 minute mark, our installer puts one on. He lines it up first and gives it a tap to get started. Then he places a block of wood over the end of the Bearing Buddy. The block of wood disperses the force of the hammer used to tap it into place.
Product Page this Question was Asked From
Kodiak 12" Hub-and-Rotor Assembly - 6 on 5-1/2 - Dacromet - 5,200 lbs to 6,000 lbs
- Trailer Hubs and Drums
- Hub with Rotor
- Standard
- 25580 / 15123
- Marine Grade
- For 5200 lbs Axles
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Kodiak
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: 15123
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: kodiak hub
- Shop: Kodiak 12" Rotor - 6 on 5-1/2 - Dacromet - 5,200 lbs to 6,000 lbs
- Q&A: Grease Dust Cap Recommendation for Kodiak Disc Brake Kit K2HR712
- Q&A: Recommended Grease/Dust Caps for the Kodiak Disc Brake Kit # K2HR526D
- Q&A: What Parts Needed When Replacing Disc Brake Rotors # KHR12D on Boat Trailer
- Q&A: Minimum Thickness Allowed for Kodiak 225 Disc Brake Rotors
- Shop: Kodiak 12" Hub-and-Rotor Assembly - 6 on 5-1/2 - Dacromet - 5,200 lbs to 6,000 lbs
- Shop: Grease Cap, 2.44" OD Drive In with Plug - Qty 2
- Shop: Kodiak Disc Brake Kit - 12" Rotor - 6 on 5-1/2 - Stainless Steel - 5,200 lbs to 6,000 lbs
- Shop: Kodiak 12" Rotor - 6 on 5-1/2 - Stainless Steel - 5,200 lbs to 6,000 lbs
- Shop: Kodiak Trailer Hub for 5,200-lb to 6,000-lb Axles - 6 on 5-1/2 - Stainless Steel
- Shop: Kodiak Disc Brake Caliper Rebuild Kit for 3,500 lb to 6,000 lb Trailer Brakes
- Q&A: Why do Tabs on Kodiak Brake Pads # K225CP Need to be Bent
- Q&A: Replacement Bearing Kit Recommendations for a 1972 Airstream Overlander
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Determining Trailer Tongue Weight
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Trailer Wiring Diagrams
- Article: Trailer Lighting Requirements
- Article: Printable Trailer Bolt Hole Pattern Template