Diameter of Wire Terminals in Spectro Wire 38656 Trailer Wiring Junction Box
Published 04/14/2016
Products Featured in This Question
Question:
Spectro 38656 junction box - Can you tell me the diameter of the threaded studs inside of box that are used to connect wiring?
asked by: ED
1
Helpful Expert Reply:
The terminals in the Spectro # 38656 are 1/4 inch in diameter, I've confirmed this with my Spectro Wire representative. The # DW05740-1 ring terminals would be compatible with the terminals in the junction box.
expert reply by:
Mike L
1
Product Page this Question was Asked From
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Adding a Battery on an Enclosed Trailer to Power Interior Lights
- Q&A: Difference Between Pro Series Drop Leg Square Jacks PS1400950376 And PS1400960376
- Q&A: Is Norcold 12V RV Mini Fridge A Good Choice For Lance Truck Camper Off-Grid
- Q&A: How to Replace a Lance 6-Pin Plug w/ a Standard 7-Way Connector
- Article: How to Charge a Trailer Battery While Driving: 3 Common Problems (And How to Fix Them)
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Recommended Option For Swapping Out A Lance Proprietary 6-Pole Socket
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: Trailer Lighting Requirements
- Q&A: Wiring Harness For Adding 7-Way To The Bed Of A 2022 Ford F-350
- Q&A: How to Remove the Outer Cover of the Ventline Exterior Wall Vent
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Most Popular Wheel Bearings