Timbren 1 inch Spacers for 2013 Chevy Express With Heavier Springs

Question

Question:

I have Timbrens already installed. I just put another leaf spring that raised my rear end enough that I now need a 1inch Timbren spacer to get the proper spacing on the Timbrens before they contact the frame. The van did not have a bolt on Timbren and was just pressed into the factory bump stop cup. How do you mount the aditional spacers with the press in cup style like my van has? Thank you

asked by: Robert F

0

Expert Reply:

The Timbren kit for your 2013 Chevy Express van is the part # TGMRG25C which is supposed to get bolted to the cup and not just pressed in there.

With the right kit installed properly you could use the 1 inch spacer part # A25723-90AH00 to make up for the suspension of your van being lifted. You will need to fix your current setup to match how it is supposed to be installed.

expert reply by: Jameson C

0

Answer 1

The SumoSprings Solo Custom Helper Springs - Front Axle #SSF-204-54 come as a pair; if you wanted four of these springs you would need to order two kits. As for the 2,500 lb weight rating, that is the pair of springs. What it means is that these…

view full answer...

Answer 2

Hello Brandon, thanks for reaching out. SumoSpring actually does not make spacers for the Solo Custom Helper Springs like the #SS46EV you mentioned. That said, we do still have spacers that will work for this, the Timbren Spacer part #A25723-90AH00…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 5

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 6

Hey good question, Adam. There is not a specific limit on how many spacers you can use with Timbrens. Most trucks that use Timbrens would not be lifted more than 4"-6" anyway, and I have heard of people using up to 6 spacers on each side. I…

view full answer...

Answer 7

Thanks for your question, Steve. Installing the Timbren Rear Suspension Enhancement System #T76FR wouldn’t eliminate the need for a weight distribution system if your setup calls for one, they actually serve two different purposes. A weight…

view full answer...

Answer 8

Hey Kirk, for the SumoSprings kit part #SS46PV that fits your 2024 Toyota Tundra you'd need to use the Timbren spacer blocks part #A25723-90AH00 to take up that extra space created by the lift. You'd need 4 of these per side as these are 1…

view full answer...

Answer 9

Hey Ben, since we know your 2025 Gulfstream 6327le is built on a Class C Ford E-350 chassis you would want the Roadmaster front sway bar part #RM-1139-176 as a confirmed fit. This will do a great job improving the handling and stability of the RV. Do…

view full answer...

Answer 10

Hey Matthew, yes the Timbren kit part #TTORSEQ1 that you referenced would work great on a vehicle that is lifted but you have to use spacers to take up that extra space created like with the part #T68MR. How big of a lift does your vehicle have?

view full answer...

Answer 11

Hey Alex, welcome back! There's a couple of options for spacers depending on how tall of a lift your 2014 Nissan Xterra has. Timbren recommends leaving a 1/2" gap between the item #TJRC01 and where they contact on your Nissan. How big of a…

view full answer...

Answer 12

I do have an option for you but SuperSprings does not offer any additional spacers for the SumoSprings Trailer Helper Springs part #SS26MV. That said, we do still have spacers that will work for this, the Timbren Spacer part #A25723-90AH00 for…

view full answer...

Timbren 1 inch Spacers for 2013 Chevy Express With Heavier Springs

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching