Recommended Components Needed For Flat-Towing 2008 Dodge Grand Caravan
Updated 04/05/2016 | Published 04/01/2016 >
Products Featured in This Question
Question:
i have a 2008 dodge grand caravan would this system handle it when i tow behind my motor home. and what do i have to do to my van to be able to tow it with this bar
asked by: Danny
Expert Reply:
The Roadmaster Falcon, part # RM-520 would work great with your 2008 Grand Caravan being flat-towed. There are 5 items you need when you want to flat-tow a vehicle. You need base plates on the towed vehicle, a tow bar, safety cables, lighting for the towed vehicle, and most states now require a supplemental brake system. I will make the recommendations for the items you need.
First, I recommend the Roadmaster XL Base Plate kit, part # 284-1. These have removable arms when you aren't towing so it looks almost invisible.
The tow bar you mentioned, part # RM-520 has a quick-disconnect system that makes it easier to remove the tow bar from your car.
For safety cables I recommend part # RM-643. These are coiled single hook safety cables.
For lighting I recommend the Roadmaster Tail Light Wiring Kit, part # RM-155.
To connect the wiring from the towed vehicle to the motorhome I recommend an umbilical cord like part # BX88254. Since this has a 4-way round plug for the vehicle end you may need to cut off the 4-way connector form the light wiring kit and replace it with the included 4-way.
for a supplemental brake system I recommend part # BRK2012. This is a wireless system that receives the signal form the motorhome and applies the brakes on your Grand Caravan with the same intensity as the motorhome.
You want to make sure you are towing the vehicle as level as possible so you may need a high-low adapter for your motorhome trailer receiver. I have attached a link to the high-low adapters we offer.
You will want to check out your owner's manual to see if there are any other restrictions for your vehicle when flat-towing.
Product Page this Question was Asked From
Roadmaster Falcon 2 Tow Bar - RV Mount - 2" Hitch - 6,000 lbs
- Tow Bar
- Hitch Mount
- Telescoping - Binding
- Steel
- 6000 lbs
- Fits Roadmaster Base Plates
- Stores on RV
- Cables Not Included
- Roadmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Parts Needed To Connect Roadmaster EZ Base Plate Kit 521877-1 To A Tow Bar
- Q&A: Base Plate Options For A 2026 Jeep Gladiator Mojave
- Q&A: Full Flat Tow Setup for 2026 Ford Bronco Badlands With Roadmaster Falcon 2
- Q&A: Upgrading Older Weldex Rear Camera System In 2006 Holiday Rambler Class A RV
- Article: How Level Should a Tow Bar Be When Flat Towing
- Q&A: How Does the Curt RVi 4 Breakaway Cable Work with the Wireless Breakaway Adapter?
- Q&A: Recommended Baseplate and Wiring Harness for a 2026 Jeep Wrangler Rubicon
- Article: Trailer Wiring Diagrams
- Q&A: Looking for the Replacement Knob for the Battery Disconnect
- Article: Flat Towing Package for 2007-2018 JK Jeep Wrangler and Wrangler Unlimited
- Article: Must-Have Flat Towing Components
- Article: Flat Towing Package for 2012-2014 Honda CR-V
- Article: Roadmaster Vehicle Specific Base Plates
- Article: What Is a Supplemental Braking System?





