Recommended Installation Method for Erickson E-Track in Enclosed Trailer

Updated 04/04/2016 | Published 03/31/2016

Products Featured in This Question

Erickson Horizontal E Track - Zinc Plated Steel - 2,000 lbs - 5' Long - Qty 1

(1210)

$43.57

Loctite RTV 598 High-Performance Silicone Gasket Maker - Black - 2.7-Fl Oz Tube

(195)

$9.42

Question:

Im trying to find a permanent way to mount the track in this truck. We have tried self tapping bolts, but those popped out eventually as my coworkers over tighten straps a bit. Im including pictures of what Im dealing with.

asked by: Joshua T

Expert Reply:

Thanks for the photo of your trailer interior. E-Tracks like # E19148 need to be mounted with at least 2 fasteners per linear foot on each side to a structural surface on the trailer in order for them to meet their specs. I see from your photo that you have a track spanning the structural ribs inside the trailer. It does not appear this installation has enough fasteners and that may well be the issue.

I can recommend a couple of options. One is to bolt the E-Tracks all the way through the trailer's ribs and outer shell. This would avoid the issue with the self-tapping screws popping out but it would also mean visible hardware (bolt heads) on the trailer's exterior. You'd do well to seal these with silicone like # LT37467.

Another option is to install additional wood material inside the trailer at the point where you want to mount the E-Track. Some 3/4-inch plywood, secured to the ribs with plenty of suitable fasteners, would provide a larger mounting surface for the track that can better disperse the force on it.

For reference I have linked all of our E-Track accessory parts.

expert reply by: Adam R