Adding a 7-Way Trailer Connector and Brake Controller to a 2011 Dodge Journey with Tow Package
Updated 03/09/2016 | Published 03/08/2016
Products Featured in This Question
Question:
Hello there folks. I know you heart his one a lot. I am building a tear camper. Im putting LED lights on it. I want to install a 7 pin plug on my car as well as electric brake controller. Is there a harness available to go from the dash mount controller to the 7 pin plug? I do have the tow package, do it has a flat four wire plug there now. What do I need to get and do to make my trailer brakes work?
asked by: Dennis S
Helpful Expert Reply:
Since your 2011 Dodge Journey already has a 4-Way flat trailer connector all you will need to add a brake controller is the brake controller itself and an installation kit that includes a 7-Way trailer connector.
There isn't a plug and play type of harness for the 2011 Dodge Journey because the vehicle isn't set up for it even if it has the factory tow package. This means there is a little hardwiring required.
For a brake controller I recommend the P2, # 90885, because it's easy to set up and use and it's reliable.
For the 7-Way and installation kit all you will need is # ETBC7. I have included some links that show and explain the ETBC7 installation for you. The video is a different vehicle but the process for the ETBC7 is the same on all vehicles. Once the installation is complete you will be good to go!
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Vehicle End Connector
- Powered Converter
- No Tow Package
- 4 Flat
- Plug and Lead
- Plug-In
- Hidden
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Does etrailer Trailer Hitch Receiver for 2018 Dodge Journey Include Fishwire
- Q&A: Recommended Flat Towing Setup for a 2026 Jeep Gladiator Willys Towed By a Diesel RV
- Q&A: How do I Change my Progressive Dynamics pd4060k from AGM Batteries to Lithium Batteries?
- Q&A: Does Curt Trailer Wiring # C56330 Work with LED Taillights
- Q&A: Replacement Motor Head for a HappiJac 4150 and 4500 System
- Q&A: Troubleshooting Lighting Issue With Curt T-Connector Installed On 2016 Dodge Journey
- Q&A: Trailer Hitch and Wiring Recommendation for 2017 Dodge Journey
- Article: How to Choose the Right Trailer Hitch Class
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Lighting Requirements
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Article: How to Strap a Kayak to a Roof Rack in 4 Steps (With Pictures)