Chrome, Two-Wire Mounting Bracket for the Optronics Clearance Light MCL63CAB
Updated 03/08/2016 | Published 03/07/2016
Products Featured in This Question
Question:
I am interested in buying these lights but need the two wire plug. I noticed that you only have the mounting plate in black. Can the single wire plug be removed from the chrome mounting plate and be replaced with the two wire plug?
asked by: Rob
Expert Reply:
Sounds like you are wanting to use the part # A67CB with the clearance light part # MCL63CAB. There's no reason you couldn't, this bracket is designed for trailers that ground through the mounting hardware though. If that wouldn't work on your trailer you would just need to run a wire from the mounting screw that runs through the ground strap and the light would work just fine.
Product Page this Question was Asked From
Black Molded ABS Mounting Bracket for Thin Line Series Clearance, Side Marker Lights
- Accessories and Parts
- Trailer Lights
- Mounting Hardware
- Brackets
- Black
- Optronics
more information >
Continue Researching
- Q&A: Availaiblity of White Half Moon Trailer Vent
- Q&A: Mounting Bracket Options for Optronics Sealed, Thin Line Clearance Side Marker Light # MC65AB
- Article: Trailer Wiring Diagrams
- Q&A: Can Single Rocker Switch # 37212625 be Used with 12 Volt DC Power
- Q&A: Replacement for Atwood Surge Brake Actuator 85778
- Q&A: Butyl Tape To Seal Trailer Roof Panel Joint
- Q&A: Will Black Bracket and Single Wire Plug for Thin Line Series Lights Fit MCL63AB and MCL63RB
- Q&A: Getting Side Marker Lights to Function as Turn Signals and Running Lights
- Article: Trailer Lighting Requirements
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: The Best Trailer Tongue Locks for Preventing Trailer Theft
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: What are the Common Types of Propane Fittings Used on RVs?