Replacement Hubs for a 2003 Venture Boat Trailer Model 2250 with 6-Lug Hubs

Updated 02/09/2016 | Published 02/07/2016

Products Featured in This Question

Trailer Idler Hub Assembly for 3,500-lb Axles - 6 on 5-1/2

(97)

$111.71

Dexter Trailer Idler Hub Assembly for 5,200-lb Axles - 6 on 5-1/2

(912)

$111.88

Dexter Trailer Idler Hub Assembly for 5,200-lb E-Z Lube Axles - 6 on 5-1/2

(75)

$143.15

Replacement Trailer Wheel Bearing Kit, Bearings 15123/ 25580, Races 15245/25520 Races, 10-36 Seal

(3548)

$30.94

Grease Seal GS-2125DL - Double Lip - I.D. 2.125" / O.D. 3.376" - 5.2K to 7K Axles - Qty 1

(2902)

$15.91

Kodiak Trailer Hub for 5,200-lb to 6,000-lb Axles - 6 on 5-1/2 - Stainless Steel

(55)

$265.95

Question:

I have a 2003 venture boat trailer model # 2250. I wanted to order complete hub assembly with bearings. The hub assembly currently on it has a 6 bolt pattern. Can you tell me what hub assembly that you carry that will work?

asked by: Jerry

Expert Reply:

I did a little research and found that your 2003 Venture Boat trailer model 2250 has a capacity of 2,250 pounds but the 6-lug hubs and bearing information I found indicate that it uses hubs normally seen on 5,200 pound axles.

Since you have a boat trailer you might be interested in Kodiak hub # KH42655S which is stainless steel so it won't corrode. It uses inner bearing 25580 and outer bearing 15123.

Another option is hub # 8-213-5UC1 which uses the same inner bearing but a different outer bearing LM67048. The outer bearing still fits the same spindle it just has a different outer diameter to fit the hub.

For EZ lube axles with grease fittings at the ends I recommend # 8-213-5UC1-EZ. Both this axle and # 8-213-5UC1 come with bearings, races, and seals. Kodiak hub # KH42655S does not so you would also need bearing kit # BK3-100 (1 per hub). This kit comes with a 2.25 inch inner diameter grease seal. If a 2.125 inch grease seal is needed use # GS-2125DL.