Would the Curt Roof Basket 18115 Fit Factory Bars of a 2014 Chevy Traverse  

The reason that brake controller tester #C51521 is listed for Curt brake controllers is because of the unique plug that is on it and Curt brake controllers. If you were to cut off the connector on the tester and hardwired a different brand of brake…

Since the Curt Brake Controller Wiring Circuit Tester #C51498 plugs into the vehicle side 7-way when it is disconnected from the tow vehicle it would not have ability to show any amperage draw on the individual brake assemblies. It can only show you…

I would be happy to help you set your 2021 Ford Bronco Sport Big Bend Edition up for tailgating. The 2021 Ford Bronco Sport Roof Rack by Rhino Rack you referenced is a great rack and is confirmed to fit your Bronco. The Roof Rack Includes: Rhino-Rack…

I do have a sewer hose storage container that will work with the RhinoEXTREME RV Sewer Hoses part #CAM39867 but the bayonet fittings on the end of this hose are not removable and measure to be 4-1/2" in diameter. Therefore, this hose will not…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…