Should Grease Be Added to EZ Lube Trailer Hubs if the Bearings were Manually Packed with Grease
Updated 01/06/2016 | Published 01/05/2016 >
Question:
I recently bought these drums and installed after packing the bearings. After I install do I need to pump grease into the ezlube axle or is just the normal packing all it needs. I did pump some in but never really flowed back out the front
asked by: Kevin T
Expert Reply:
On EZ lube hubs and axles you would want to add grease until it is full (when you see it flow out). When that happens it indicates that the proper amount of grease is in the hub. Having the bearings packed and the little bit of grease you have added is probably fine but it is better to be safe and fill 'em up!
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly - 7K E-Z Lube Axle - 8 on 6-1/2 - Pre-Greased - 1/2" Stud
- Trailer Hubs and Drums
- Hub with Drum
- EZ Lube
- Pre-Greased
- 25580 / 14125A
- Standard Grade
- For 5200 lbs Axles
- For 6000 lbs Axles
- For 7000 lbs Axles
- 1/2 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: bearing grease
- Search Results: jack stands
- Search Results: bearing tool
- Search Results: bottle jack
- Search Results: tst507
- Q&A: Replacement Grease Seals for a Dexter 5,100 lbs Axle
- Search Results: 14125a
- Q&A: Which is Better? Tireminder or TST Tire Pressure Monitor System
- Video: Breakdown of the Big Truck Big RV Tongue Weight Scale
- Shop: Dexter Bearing Kit for 7K Axles - Bearings 14125A/25580, Races 14276/25520, Seal 10-36
- Shop: Replacement Trailer Wheel Bearing Kit, 14125A/25580 Bearings, 14276/25520 Races, Seal 10-36
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb to 7,000-lb Axles - 12" Diameter - 8 on 6-1/2
- Shop: Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased
- Shop: Dexter Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 7,000 lbs
- Video: Installing the LubriMatic Prime Guard High Temperature Wheel Bearing Grease
- Search Results: dexter brake drum
- Q&A: Does Tire Linc Pro TPMS Require Metal Valve Stems
- Shop: Dexter Trailer Hub & Drum for 5,200- to 7,000-lb Axles - 8 on 6-1/2 - 9/16" Studs - Pre-Greased
- Shop: Timken Bearing Kit, 14125A /25580 Bearings, 14276/25520 Races, 10-36 Seal
- Video: Review of TruRyde Trailer Spindles - EZ Lube Spindle - TRU37FR
- Video: Feature Review Dexter Trailer Hub and Drum Assembly
- Q&A: Recommended 12" Hub And Drum With An 8 On 6-1/2 Bolt Pattern
- Q&A: Differences Between Dexter 42866UC3-EZ and 8-219-4UC3-EZ Trailer Brake Hub/Drums
- Q&A: Difference Between Dexter Hub and Drums 42866UC3 & 42866UC3-EZ
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Video: Breaking Down the Dexter Trailer Hub and Drum Assembly for 5,200-lb Axles
- Video: Dexter Trailer Hub and Drum Assembly Spec Review
- Q&A: Do E-Z Lube Axles Need Bearings to be Packed by Hand


