Installation Difficulty and Suspension Concerns When Using a Trailer Hitch on a 2007 Lexus IS250

Updated 07/14/2010 | Published 07/13/2010

Products Featured in This Question

Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

(48)

$433.82

1-7/8" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Stainless Steel - 2,000 lbs

(348)

$35.24

2" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Stainless Steel - 3,500 lbs

(348)

$37.43

Curt Powered Tail Light Converter w/ 4-Way Flat Trailer Connector and Install Kit

(160)

$168.74

Question:

first of all, I am wondering how to install this hitch to my car, mine is IS 250 07. is it easy to install or what? then Seocond, I just worry there is any problems to my suspension when I install this and I tow. I will use this for moving my stuff. I need a quick answer, please give me details asap thanks.

asked by: sung j

Expert Reply:

We usually gauge trailer hitch installation difficulty by how long it takes to install the hitch. This hitch requires that the exhaust be temporarily lowered and that a heat shield be modified or trimmed so the hitch will fit. We estimate that if you have all the proper tools and another person to help, it will take about 50 minutes to install the Curt Trailer Hitch, # 11372. If you have some automotive experience, this installation will be mildly difficult. I have included a link to the installation instructions below.

Your 2007 Lexus IS250 is rated to tow a certain amount of weight. You will need to check the vehicle owners manual to find how much weight your vehicle can handle. As long as you do not exceed that limit, you will not need to worry about damaging the suspension; especially if you do not plan to tow very often.

The hitch comes with the necessary drawbar but not a hitch ball. I recommend using # A-80 (for trailers that require a 1-7/8 inch diameter ball) or # A-82 (for trailers that require a 2 inch diameter ball).

When towing a trailer, you will also need wiring. The trailer wiring for your Lexus is Curt Upgraded Circuit Protected Powered Tail Light Converter w Hardwire Kit and Tester - 4-Pole Flat # C59496. This kit provides a 4-Way trailer connector at the rear of the vehicle. I have included a link to the installation details below.

expert reply by: Michael H