Is Template for Locating Where To Drill Hole Included With Curt # C607-604 Gooseneck Hitch

Question

Question:

The installation text mentions a pilot hole locating tool that mounts between the cross bars for centering a pilot hole for the 4inch bed hole. is this template/tool part of the kit?

asked by: John P

0

Expert Reply:

The template for correctly locating where to drill the 4 inch diameter hole through the truck bed is indeed included with the kit, as shown in the parts list from the installation instructions. You can look over the instructions by using the provided link.

expert reply by: Mike L

0

click to enlarge

Answer 1

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 2

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

Trailer wheel bearings are specific to the spindle that is installed on the axle that is on your trailer. You will need to safely support the trailer, remove the wheel and tire, remove the grease cap, remove the cotter pin and washer that secures the…

view full answer...

Answer 5

Hey Mary, thanks for reaching out. We do have a hitch for your 2005 Chevy 2500 HD that is up to the task. Here is what I recommend: - Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2" #C15703 This is the strongest hitch…

view full answer...

Answer 6

Hey Christoph, you can use the HappiJac turnbuckle part #LC182896 with your Torklift tie downs. We had a customer with this type of setup report back that it worked well for them. This has a reach range of 22-1/2 inch to 35-1/2 inches so you might…

view full answer...

Answer 7

The correct replacement mounting brackets and hardware for your 2004 Chevrolet 2500 HD with the extended cab are dependent on which Westin 3 inch nerf bars you have. The brackets and hardware are custom to the truck as well as the nerf bars. Use…

view full answer...

Answer 8

Since the hitches we offer for your 2003 GMC Sierra 2500HD attach to the frame and not the bumper they will all still fit and work great. The Curt Class V hitch #C15703 would be an excellent option as it has plenty of weight capacity as it's…

view full answer...

Answer 9

There are actually a couple differences between the Curt EZr #C619-648 and the Double Lock #C60712. The visible one will be that the safety chains on the #C60712 are not centered like the ones on the #C619-648. The difference that is not visible is…

view full answer...

Is Template for Locating Where To Drill Hole Included With Curt # C607-604 Gooseneck Hitch

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching