Grease Seals with Inner Diameter of 1.750-Inches
Updated 11/03/2015 | Published 11/02/2015
Products Featured in This Question
Question:
im looking for a 1 3/4 id seal spindle wear sleeve do you have them
asked by: Mike M
0
Expert Reply:
We offer three grease seals that have a 1.750-inch inner diameter. You can see these by clicking on the link provided. The three seals have outer diameters of 2.312, 2.356 and 2.722-inches. You can use a digital caliper like # PTW80157 to measure your hub's bore to find out which seal is the proper fit. For example, part # 10-42 is a single-lip seal with an outer diameter of 2.33-inches meant for Dexter 2800-lb axles.
expert reply by:
Adam R
0
Product Page this Question was Asked From
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Recommended Bearing Kit for a 3,500 lbs Axle on a Boat Trailer
- Q&A: How to Determine the Replacement Hubs for a 2002 Magic Tilt Trailer
- Q&A: Kodiac Disc Brake Kit Compatibility with UFP DB-42 Axle
- Q&A: Diameter of Spindle Washer # SW1000 and Wobble Roller Retainer Ring CE10981
- Q&A: How to Choose the Correct Size Trailer Winch For a Boat Trailer
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Will Installing Trailer Hitch on 2020 Nissan Murano Keep Hands Free Liftgate From Working
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Troubleshooting Trailer Bearings that Fit Almost Too Tight to Install
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Lighting Requirements