Menu Icon

What Size are the Mounting Bolts for Draw-Tite Hitch Part # 75528

Question:

I have Draw-Tite receiver hitch, part number 75528 for my 2009 Chevrolet Traverse. Do you have the specs for the mounting bolts needed to mount?

Expert Reply:

I have added a link to the instructions below for you to review. There are 6 hex head, M12X1.75X45 CL10.9. The M12 bolts should be tightened to 92 Lb.-Ft.

There are also 2 hex head 1/2inch-13 X 1-3/4 inch Gr.5 bolts. These should be tightened to 75 Lb.-Ft.

If you need replacement hardware, I would suggest using part # RHK. Enter the brand and model of the hitch, and we can send you a complete hardware kit with all the bolts, washers, nuts etc. for that hitch.

expert reply by:

Ask The Experts a Question >>


Products Referenced in This Question


Product Page this Question was Asked From


Similar Expert Q&A Pages

See More Q&A Expert Answers >>




^
About Us
photos and videos
1,056,204

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570

Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
71

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.