Replacement Equalizer Bar For 10K Axle With 2-1/2 Inch Slipper Springs

Question

Question:

Is there any way I can purchase just the Equalizer Bars for Left and Right? Part Number 13-140-3 42.25 axle spacing 1inch center hole 18 3/8 length Thanks,

asked by: Michael K

0

Expert Reply:

We do carry part # 13-140-3 equalizer bars.

These are designed for 10,000 lb axles and 2-1/2 inch slipper springs, and can be used on either the left or right hand.

expert reply by: Jeffrey L

0

Answer 1

I do have an option for you but we do not carry the exact replacement you are looking for. For your trailer, I recommend using the Dexter Equalizers part #13-140-3. These equalizers are almost an exact replacement for the ones you currently have. All…

view full answer...

Answer 2

Hello Cody, we have just the thing. For the 1" diameter center bolt you can use part #7-136-2-6-112. The 3/4" leaf spring eye bolt is part #7-135-2.

view full answer...

Answer 3

For the right hand side 18-3/8 inch long equalizer for 2-1/2 inch wide slipper springs you can use #13-140-3. It can actually be used as a left or a right.

view full answer...

Answer 4

When installing rubber or nylon bushings like the Dexter #K71-372-00 in your leaf springs or equalizers, you'll want to use a block of wood or something that will protect the bushing, while hitting it with a hammer until it seats into the spring.…

view full answer...

Answer 5

It sounds like you have an antiquated suspension design or it was installed that way aftermarket at some point. Replacing the bushing with bronze ones such as #D014-077-00 would help the bushing to last longer but may not completely solve the issue.…

view full answer...

Answer 6

You will need to confirm the Equalizer on your Kaufman 3 car hauler trailer. A Dexter 10K general duty axle will generally use either the Equalizer #13-141-3 or #13-140-3. These are both for 2-1/2" wide slipper springs that mount to the trailer…

view full answer...

Answer 7

Hello Everett, thanks for reaching out. Sadly, we do not offer the replacement locking handles for the B&W Companion 5th Wheel Hitches. If you reach out directly to B&W they should be able to provide the parts you need. They will likely ask…

view full answer...

Answer 8

We can get you a replacement for your TDE LP75 disc brake actuator; that's a 7,500 lb actuator that accepts a 2" hitch ball, and the correct option will depend on if your trailer tongue is 3" wide x 4" tall or 3" wide x…

view full answer...

Answer 9

Hello there Randy, we have just the thing! You can use the Dexter Trailer Hub and Drum Assembly #DX46XR to replace your 8-285-8UC3-A hub/drum assembly. It uses the same #25580 inner bearing, #02475 outer bearing, 8 on 6-1/2" bolt pattern,…

view full answer...

Replacement Equalizer Bar For 10K Axle With 2-1/2 Inch Slipper Springs

Product Page this Question was Asked From

Continue Researching