Using 215/60-8 Tires on Golf Cart
Updated 09/16/2015 | Published 09/15/2015 >
Question:
Looking at buying two of your Kenda 8 inch galvanized 4 on 4 wheels load range c for use on my golf cart. Is this a good application? Thank-you.
asked by: Arnie B
Helpful Expert Reply:
The Kenda # AM3H300 consists of a 215/60-8 tire on a 8 x 7 inch rim with a 4 lug on 4 inch bolt circle. The tire is 8.9 inches wide and 18.3 inches in diameter. If this is compatible with your existing tires and wheel bolt pattern, this wheel/tire combo should work great for you.
Keep in mind that this tire is about a 1/2 inch wider than a typical golf cart tire. As long as you have the extra 1/4 inch of clearance to the inside of the tire, it should fit well.
Product Page this Question was Asked From
Kenda 215/60-8 Bias Trailer Tire with 8" Galvanized Wheel - 4 on 4 - Load Range C
- Trailer Tires and Wheels
- Tire with Wheel
- Bias Ply Tire
- Load Range C
- 215/60-8
- 8 Inch
- M - 81 mph
- 4 on 4 Inch
- Steel Wheels - Galvanized
- Kenda
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: What is the Offset and Backspacing of Dexstar 8x7 Inch Trailer Wheel with 4 on 4 Bolt Pattern
- Q&A: Can 18.5 x 8.5 - 8 Tires be Replaced with 215/60-8 Tires
- Q&A: How Much Offset Does the Kenda 215/60-8 Bias Trailer Tire Have?
- Q&A: Can 20.5x8.5-10 Trailer Tires be Used in Place of 18.5x8.5-8 Tires on Snowmobile Trailer
- Q&A: Measuring for Replacement Axles, Bearings, and Leaf Springs for 1976 Dilly Boat Trailer
- Q&A: Replacement Bearing/Seals for Hubs With 1 Inch Spindle
- Q&A: Replacement Grease Seal for Dexter Axle 69-46
- Article: How to Fix a Bad Trailer Ground
- Article: How to Raise Your Travel Trailer Height
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Level Your Fifth Wheel in 3 Simple Steps (Manual or Auto-Level)
- Article: Trailer Lighting Requirements
- Article: How to Determine Tire/Wheel Diameter



