Will the RoadMaster Base Plate to Blue Ox Adapter # RM-033 Work with the Blue OX Tow Bar and Jeep YJ

Published 06/09/2010

Products Featured in This Question

Roadmaster Crossbar-Style Base Plate Adapter for Blue Ox and Demco Tow Bars

(72)

$91.96

Roadmaster Crossbar-Style Base Plate Kit - Fixed Arms

(171)

$575.00

Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 4-Way Flat Connectors

(3197)

$100.94

Roadmaster Bulb and Socket Tail Light Wiring Kit for Towed Vehicles - Incandescent

(439)

$82.60

Roadmaster Universal Magnetic Tow Lights with 4-Way Flat Trailer Connector

(43)

$83.18

RoadMaster 68" Single Hook, Coiled Safety Cables - 6,000 lbs

(656)

$71.04

Question:

I have a jeep wrangle 1993 YJ. A blue ox Advent ll tow bar. will this bumper plate fit what I have

asked by: Erik

Expert Reply:

Along with the RoadMaster Base Plate to Blue Ox and Demco Tow Bars Adapter, item # RM-033, you will also need the Roadmaster Standard Base Plate Kit, item # 1409-1, for your 1993 Jeep Wrangler. These base plates attach to the U-channel bumper on most Jeep Wranglers and the adapter will then be used to attach the Blue Ox Aventa II tow bar.

Some items you may need to make your Jeep YJ ready to be towed are recommended below.

If you do not already have them you will need the RoadMaster 68 inch Single Hook, Coiled Safety Cables - 6,000 lbs, item # RM-643, which are coiled to keep the safety cables from dragging on the ground

There are 3 options for tail light wiring. If you will not be towing often the Magnetic Towing Light Kit, 20 ft. Long Cord, item # RM-2120, is an option. If you plan on towing more often you can use the RoadMaster Tail Light Wiring Kit with Bulbs, item # RM-155, which requires mounting a bulb in the red portion of the towed vehicle tail light housing or the Roadmaster Universal Hy-Power Diode Wiring Kit, item # RM-154, which uses the towed vehicle tail lights and requires diodes to be spliced into the wiring to prevent feed back onto the towed vehicles electrical system.