Replacing Horse Trailer Wiring

Updated 08/12/2015 | Published 08/11/2015

Products Featured in This Question

Wire - Jacketed 6-Wire - per Foot

(166)

$3.99

Trailer Wiring Junction Box

(824)

$35.47

Metal Loom Clamp - 1/2"

(180)

$4.19

12 Gauge 7 Conductor Jacketed Wire - Per Foot

(518)

$10.76

Ring Terminal -16-14 Gauge - 1/4" Ring ID - Qty. 1

(75)

$1.22

Ring Terminal - 12-10 Gauge Wire - 3/8" Ring ID

(75)

$1.86

Deka Heat Shrink Butt Connector - 12-10 Gauge - Nylon Insulation - Yellow - Qty 10

(1148)

$13.21

Pollak Black Plastic, 7-Pole, RV-Style Trailer Connector - Trailer End

(723)

$8.37

Question:

I need to replace the wire to my horse trailer it is a 6way cable yours is 14 g Ive seen it recommended to go 12 g should I get your 7 way cable to get 12 g or is 14 g enough?

asked by: Glenn

Expert Reply:

If you currently have a 6-way connector on your trailer, the 7-wire # DW04914-1 will be too large for your connector. In that case, you will want to use the 6-wire # DW04906-1.

If your vehicle has a 7-way connector and you've been using an adapter, this is a great time to add a 7-way connector to your trailer to avoid needing the adapter. A 7-way connector is the more commonly found connector. You can use the 7-wire # DW04914-1 with a 7-way connector # PK12706, or a pre-wired connector like # H20046, to convert your trailer to a 7-way connector. If you need a new 6-way connector on your trailer, you can use the pre-wired connector with pigtail # H20036.

When installing the connector pigtail on your trailer, a junction box # 38656 will help protect your connection points and give the installation a more professional look. Ring terminals, # DW05705-1 for the wiring from the trailer and # DW05702-1 for the wiring from the pigtail, will allow you to connect the wires to the posts in the junction box. Metal loom clamps # A0500 will allow you to secure your wires up and out of the way after installation.