Landing Gear for a 1991 Dutchmen 5th Wheel Trailer

Question

Question:

Will this landing gear fit a 1991 Dutchman 5th wheel. Stromberg Carlson LG-183708 Manual Landing Gear 5Th Wheel with Jacks, Gears, Hardware

asked by: Brenda

0

Expert Reply:

There isn't a specific fit list for Stromberg-Carlson landing gear # LG-183708 but this set, Lippert, Venture, Atwood, and many other brands all mount the same so it is likely that this system will fit. You should have 17-1/2 inches from the bottom of the top frame clamp to the top of the bottom frame clamp (see photo).

expert reply by: Michael H

0

click to enlarge

Answer 1

I spoke with my contact at CURT Manufacturing about hitch mounted spare tire carrier #C31006, and he stated that it will hold your 85lb spare, provided that the trailer hitch itself is also capable of supporting the combined weight of the spare and…

view full answer...

Answer 2

Hey Mel, thanks for reaching out. You are exactly right. The white wire with the ring terminal is the ground. Grab a self-tapping screw and ground it to the frame. Make sure you ground to good clean metal with no corrosion or paint.

view full answer...

Answer 3

Basically they are the same connector with just a slightly different part number. We carry the part #HM40975 and if you ordered the 40974 from someone else (not recommended haha) you'd get the same thing which just a different part number on the…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Hey Cody, we can help but since you have 9-1/2 inches between your current jack mounting brackets nothing we offer would be a direct fit as that is not a standard dimension for jacks made currently. So best option would be a set like the part…

view full answer...

Answer 8

We can get you un-stranded! The correct follow leg for your landing gear is going to depend on how long it is. If your leg measures 29-1/2" (see attached photo), you would need replacement #LG-179014, which can be used with most landing gear…

view full answer...

Answer 9

Lippert made specific replacement landing gear for your 2011 Keystone Montana 5th Wheel. Replacement Lead Leg for Keystone Montana 5th Wheel Landing Gear #LC178653 and Replacement Follow Leg for Keystone Montana 5th Wheel Landing Gear #LC178652.

view full answer...

Answer 10

Hi James; the better option would be the Bulldog #BD500162 you were looking at. You can add the Motor and Switch Kit for Stromberg Carlson Landing Gear #LG-217884 to the Bulldog which will give it the same functionality as the #LG-4 while saving you…

view full answer...

Answer 11

Hi Shaun, I can definitely help with that. From what we typically see on the 2020 Forest River Wolfpack 365PACK16, the most common landing gear setup is the Lippert/Venture style system with 33-1/2 inch outer tubes and 15-1/2 inch inside-to-inside…

view full answer...

Answer 12

I have a few different options for you depending on the route you would like to take. However, regardless of which route you pursue you will need to take some measurements of your outer jack tube length and weld stop spacing. If you are handy and the…

view full answer...

Landing Gear for a 1991 Dutchmen 5th Wheel Trailer

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching