Replacement Hub Drum Recommendation to Replace One with Grease Seal 10-36
Published 07/31/2015
Question:
I am looking for a integrated hub/drum from a Lippert 8000 pound axle. The hub is 8x6.5, 5/8inch studs, and uses a 10-36 seal. The drum is 12x2. There is 2420801inch cast into the hub, along with LCI. It has electric brakes. I also know there is a Dexter version of this hub as the previous owner installed a Dexter hub on the one wheel. The 5/8inch studs are the oddity...I would consider other options. Thanks,
asked by: Steve D
Expert Reply:
The replacement hub/drum you would need is the part # 8-219-50UC3. Because you gave me the grease seal number I was able to determine that there is only one Lippert spindle size that has the 10-36 seal.
The # 8-219-50UC3 also has the same bolt pattern that you need.
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb Axles - 8 on 6-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub with Drum
- Standard
- 25580 / 14125A
- Marine Grade
- For 5200 lbs Axles
- For 6000 lbs Axles
- For 7000 lbs Axles
- 1/2 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Search Results: 166078
- Search Results: rg05~100
- Search Results: 126a1
- Search Results: akhd~655~6~ez~k
- Search Results: 12 inch equalizer
- Search Results: pk12706
- Q&A: Replacement Oil Bath Hub Drum for 8 on 6-1/2 Bolt Pattern on 8,000 lb Axle
- Q&A: Replacement Trailer Hub/Drum for Part Number 2420801
- Search Results: 2420801
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Shop: Optronics LED Trailer Clearance or Side Marker Light - Submersible - 3 Diodes - Round - Red Lens
- Shop: Equalizer for 2" Wide Slipper Springs - 12" Long - 7/8" Center Hole
- Shop: Spring-Eye Bolt with Locknut for Slipper Springs - 3-1/2" Long
- Shop: Equalizer for 2" Wide Slipper Springs - 12" Long - 7/8" Center Hole - Zinc Plated
- Shop: Pollak Black Plastic, 7-Pole, RV Blade-Style Trailer Socket - Vehicle End
- Shop: Triple-Axle Trailer Hanger Kit for 2" Slipper Springs - 12" Long Equalizers
- Q&A: What is the Difference Between Grease Seal 58846 and Grease Seal 10-19?
- Q&A: Proper Orientation of Trailer Electric Brake Assemblies
- Q&A: Disc Brake Conversion Kit For 2021 Grand Design Solitude 310GKR With 7,000 lb Axles
- Q&A: Meaning of MTI Number On Dexter Hub and Drum Assembly
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Will Hydrastar Disc Brake Kit Fit on 2001 Take3 Trailer with Tandem 7k Axles
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub