Determining Correct Replacement Vent For Heng Vent
Updated 07/08/2015 | Published 07/06/2015 >
Products Featured in This Question
Question:
ok guys I need 2 roof vent covers hail storm They are hengs brand, theone with motorized fan model # 122112 looks to be 14.5 x 14.5 the other no fan looks the same, measures the same, same mounting hardware. These guys have riveted metal hinge and riveted opening track. Do you have a replacement 2 and do they come in a tinted smoke. Also something that is not so brittle. OPTIONS PLEASE....trailor 2012 Trail Sport by R-Vision..thanks
asked by: Jim Z
Expert Reply:
In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14".
To pick the correct cover, you will also need to know the type of hinge you need.
There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on the Camco # CAM40154; or a rolled metal continuous hinge like on the Ventline # BVD0449-A03; and universal hinge as shown on the MaxxAir # MA00-335001.
Basically the easiest way to select the correct replacement cover is to remove the existing cover and match the hinge and lift bracket to the photos on our site along with the dimensions. A link to all of the replacement vent covers is provided to match up with your cover.
If it is not clear which hinge style that you have, the MaxxAir above is a Universal Replacement Lid.
In the event that you don't find a lid you like, I also included a link to our main page for our complete 14 x 14-inch vent assemblies. These are offered in manual or powered lift and with or without fans. If you install a complete new vent you'll need an installation kit, either # 344270KITW for a metal or coated metal roof or kit # CAM25013 for a rubberized roof.
Product Page this Question was Asked From
Camco RV Vent Installation Kit - Rubber Roofs or Sidewalls - White Butyl Tape
- Accessories and Parts
- RV Vents and Fans
- Vent Install Kit
- Camco
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Safety Step Sand Away Dirt Trapping Step Cover - 22" Long x 8-1/4" Wide
- Search Results: 81742b
- Shop: Combo Bar 6" with 1-1/4" Trailer Hitch Receiver
- Shop: 906 Incandescent Light Bulb - Wedge Base - 5 Watt - Soft White - Qty 2
- Shop: Thetford AquaMAX Enzyme RV Holding Tank Treatment - Spring Showers Scent - 1 Gallon
- Search Results: 385311658
- Q&A: Replacement Motor for Lippert Model 1-065-041012-01 Landing Gear
- Shop: Ultra-Fab Chock and Lock Wheel Stabilizers for Tandem-Axle Trailers and RVs - Qty 2
- Shop: Super Grip Chock Wheel Stabilizers for Tandem-Axle Trailers and RVs - Qty 2
- Search Results: advent air rv air conditioners
- Search Results: hayes trailer brake controller
- Search Results: fcr10dcgta
- Search Results: 013~520
- Search Results: x chocks
- Shop: Replacement Screen Frame with Screen for Ventline Ventadome Powered Lift Roof Vents - Birch White
- Q&A: Expanding Go Power Solar on 2021 Jayco Eagle
- Q&A: Recommended Butyl Tape For Installing Slide-Topper Awning
- Article: How to Replace or Install an RV Roof Vent
- Q&A: Possible Replacement Solution for Reflect-O-Lite 1400
- Q&A: Can the Wires for the Digital Controller on the Fogatti Quiet LP Gas RV Furnace Be Extended?
- Q&A: Can Trailer Breakaway Kit be Used without a Battery
- Q&A: Roof Vent Recommendation For A 1978 VW Adventurewagen
- Article: How to Repair an RV Roof
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?
- Article: How to Replace an RV Roof Vent Cover
- Article: How Much Trailer Can I Really Tow
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Measure for Trailer Hitch Drop

