2 inch Rise Ball Mount Availability

Updated 06/15/2015 | Published 06/13/2015

Products Featured in This Question

2" Hitch Ball - 2" Rise - 1" Diameter x 2-1/8" Long Shank - 6,000 lbs

(3913)

$30.11

Curt Class I Drawbar - 5" Rise - 9-9/16" Long - 2,000 lbs

(2282)

$29.95

Curt Dual Length Ball Mount for 2" Hitches - 2-3/8" Rise, 3-5/8" Drop - 7,500 lbs

(165)

$55.73

Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs

(2282)

$46.30

Question:

I need a 2inch hitch ball with a 2 inch rise. they seem to all have a 1 inch shank I also need a class 1 drawbar with a 5 inch rise. They all have a 3/4 inch hole. Is it safe to drill out the hole? Will this set-up work? Thank you!!

asked by: Mark L

Expert Reply:

We carry several ball mounts that have a 2 inch rise. I attached a link to a page that has all of them listed. The most popular one we carry for a 1-1/4 inch hitch would be part # C45521 and for a 2 inch hitch part # C45230.

We do carry a 2 inch hitch ball with a 2 inch rise built into it that has a 1 inch shank diameter, part # C40034.

The thing about Class I ball mounts is that you are only supposed to use the recommended ball mount for the hitch that is installed in the vehicle. With that being said we do have a 5 inch rise ball mount that fits Class I hitches, part # C45024.

I can't safely recommend you drill out the ball hole of a ball mount as that would void the warranty.