Trailer Hitch that is Mostly Hidden for a 2015 Chrysler 200

Updated 05/13/2015 | Published 05/12/2015

Products Featured in This Question

Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K

(2343)

$42.38

Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(5)

$58.73

Question:

Do you have any pictures available of a hitch installed on a 2015 chrysler 200. I am looking to install one to be used very rarely and would like for it to be hidden as much as possible.

asked by: Jason T

Expert Reply:

I included an image for the instructions for Draw-Tite trailer hitch # 24919. As you can see the receiver will be basically the only part visible. This is because it is welded to the bottom of the cross tube which is hidden.

If you plan on doing some towing with the hitch on your 2015 Chrysler 200 then the correct ball mount to use is # 3593. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. And for trailer wiring use # C56242.

If you want to use the hitch for an accessory such as a bike rack or cargo carrier then you have to make sure the accessory is rated for use with a Class I trailer hitch. Also, with a bike rack, you are limited to 2 bikes maximum on a Class I hitch.

expert reply by: Michael H