Recommended Kits To Change Trailer Brakes From Drum To Disc For 7,000 Lb Axle

Updated 05/07/2015 | Published 05/06/2015

Products Featured in This Question

Kodiak Disc Brake Kit - 13" Hub/Rotor - 8 on 6-1/2 - Raw Finish - 7,000 lbs

(11)

$921.52

Replacement Trailer Wheel Bearing Kit, 14125A/25580 Bearings, 14276/25520 Races, Seal 10-36

(3597)

$45.86

Question:

i have a 3100rl keystone montana 5th wheel with dexter tandem axle i want to replace the drum bake to disk brake axle are 7000 lbs they are the ez lube i dont care about the ez lube i like to take them off and grease them myself so my question is which disk brake kit do i need ill give you the spec of my brakes 8 stud 1/2 inch with rear bearing 25580 outter bearing 14125A and rear grease seal 10-36 wheel size is 16

asked by: Ralph

Helpful Expert Reply:

We have just the kits you need to change the brakes on your Keystone Montana fifth wheel.

I recommend the Kodiak Disc Brake Kit, part # K2HR712. This kit has an 8 on 6-1/2 bolt pattern and is designed for 7,000 lb axles. This has a 5 bolt brake flange configuration.

Since the bearings are not included with # K2HR712 I also recommend the TruRyde Bearing Kit, part # BK3-200. Each kit includes the bearings, races, seal, and cotter pin for one wheel.

Since disc brakes operate at a higher pressure than drum brakes, you will want to make sure you have the right actuator for use with disc brakes. I have attached a link to our product page for trailer couplers with 7,000 lb capacity that are designed for disc brakes.

expert reply by: Jeffrey L