Is Factory Style 7-Way and 4-Way Connector 30608 Compatible With the Prodigy Brake Controller 90185

Updated 04/13/2010 | Published 04/12/2010

Question:

Will this part work for brake control, using prodigy brake control? I have a 2007 Nissan Armada, does not have trailer package, althouth the 7 point plug is under the bumper. Will everything work when I hook up this part and prodigy brake control with the supplied wire harness for under the dash.

asked by: John P

Expert Reply:

Yes, the factory style 4 and 7-Way connector # N40975 would be a perfect pairing with the Prodigy P2 brake controller # 90885.

You would simply plug the # N40975 connector into the factory socket you found near the driver side frame rail. The included relays would need to be installed in your relay panel, which would be located on the passenger side, near the battery.

The Prodigy P2 brake controller # 90885 and wiring adapter kit # 3050P would be used to complete the installation. The brake control wiring adapter would plug directly into your factory brake control harness, located underneath and left of your steering column. It should be taped to another harness near your emergency brake pedal.

I have included links for the brake controller and wiring adapter kit installation, if needed.

expert reply by: Sarah L