Disc Brake Kit for 5th Wheel Trailer That Uses 8-Lug Wheels on 6000-lb Dexter Axles
Updated 03/09/2015 | Published 03/07/2015
Products Featured in This Question
Question:
I am looking for a disc brake kit that will fit my 5th wheel. I have 6000lb lippert axles with 8 lugs. In your 6000lb kit list, I noticed all of the hubs had 6 studs. Will 7000lb kit fit?
asked by: Jason
Expert Reply:
The key to selecting disk brakes for your 5th wheel is to match up the bolt pattern (in your case 8-on-6-1/2) as well as the brake flange mounting hole pattern, bearing set and axle weight capacity. It is fine to use a brake kit rated higher than your axle capacity, but never one rated lower.
You need to match your hub's bearings to the new kit to ensure that the hub/rotor assemblies will fit your spindles. The Kodiak Disc Brake Kit # K2HR712 that you referenced has the bolt pattern and capacity you need. It uses a 5-bolt brake flange and the following bearings, races and seal:
Inner bearing: # 25580
Outer bearing: # 14125A
Inner race: # 25520
Outer race: # 14276
Seal: # RG06-070
You'll want to check your existing hubs' bearings/races/seal part numbers to ensure a proper match. Please see the linked photo. The other items you'll need are a brake line kit like # 20TA-BLKIT, electric-over-hydraulic (EOH) actuator like the HydraStar # HBA16 and a trailer brake controller that is compatible with EOH system, such as the Prodigy P3 # 90195.
The linked article covers each of these items in detail and will give you a complete breakdown of the process to convert your 5th wheel from electric brakes to EOH disc. The other link included will let you see all 7000-lb-rated disc brake kits.
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 13" Hub/Rotor - 8 on 6-1/2 - Raw Finish - 7,000 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 7000 lbs
- Brake Assembly
- 8 on 6-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Parts Needed To Convert Trailer From Electric Drum Brakes To Electric Over Hydraulic Disc Brakes
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Q&A: Replacement Actuator Recommendation for Atwood 85778
- Q&A: Replacement Converter for WFCO WF-8955PEC for Lithium Batteries
- Q&A: How to Choose Correct Capacity for Trailer Safety Chains
- Q&A: How to Select the Proper Length Safety Chains for a Trailer
- Q&A: Solution to Replace WFCO 8735P to Charge Lithium Batteries
- Article: Double-Eye Trailer Suspension System Review
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: Most Popular Wheel Bearings
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Adding Electric Over Hydraulic Disc Brakes
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: How to Measure a Trailer Axle