Can a 2,000 Pound Trailer Axle be Fitted with Electric Brakes and 10 or 12 Inch Wheels
Published 02/26/2015
Products Featured in This Question
Question:
Is there a trailer axle or spindle that can have electric or hydraulic brakes and a 10 or 12 inch wheel. The lighter weight axle, 2000 lb capacity does not show one with brakes.
asked by: Dave M
Expert Reply:
You would need to step up to a 3500 pound set up to get an axle that comes with brake mounting flanges. You could have brake mounting flanges welded to a 2K axle if you wanted but it is a precision job that requires the proper equipment and someone who has performed this job before.
So for example you could use axle # T20BTR-6048 with hub and drum assembly # 8-257-5UC3. then you would need brake mounting flange # 4-34 and brake assemblies # 23-47 and # 23-48.
The hub and drum assembly will accept 10 or 12 inch wheels with a 5 on 4-1/2 bolt pattern.
Product Page this Question was Asked From
Dexter Trailer Idler Axle w/ Idler Hubs - EZ-Lube - 4 on 4 Bolt Pattern - 60" Long - 2,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Idler Hubs
- 2000 lbs
- 4 on 4 Inch
- 48 Inch Spring Center
- 60 Inch Hub Face
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Search Results: breakaway
- Search Results: adjustable trailer coupler
- Search Results: reciever tube
- Search Results: trailer brake backing plate
- Shop: Dexter Trailer Axle Beam with Standard Spindles - 60" Long - 2,000 lbs
- Shop: Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Electric Trailer Brakes - Parking Brake Ready - 10" - Left/Right Hand Assemblies - 3.5K
- Q&A: Axle Flip Kit for a 1,000 Lb to 2,000 Lb Trailer Axle 1-3/4 Inch Diameter
- Shop: Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear
- Shop: Brake Mounting Flange for 1-3/4" Round Trailer Axles - 2K
- Q&A: Adding Electric Brakes To 2,200lb Dexter Torsion Axles
- Article: Trailer Lighting Requirements
- Shop: Dexter Trailer Hub and Drum Assembly for 2,000-lb Axles - 7" - 5 on 4-1/2
- Q&A: How to Tell if Dexter Axle 3,500 lb Electric Trailer Brakes Will Fit Axle
- Shop: Dexter Trailer Springs Over-Under Conversion Kit
- Article: What are the Common Types of Propane Fittings Used on RVs?
- Shop: Suspension Enhancement
- Q&A: 4 Hole Brake Mounting Flange Dimensions for 10 Inch Brake Assembly
- Q&A: What is the Difference Between Over 80 inch and Under 80 inch Trailer Tail Lights
- Shop: RV Exterior Lighting
- Search Results: swivel d ring
- Search Results: bearing grease
- Search Results: axle flange
- Video: Breaking Down the Grease Cap, 1.988" OD Drive In
- Shop: Brake Controller
- Shop: Trailer Hitch
- Video: etrailer Trailer Brake Controller 7-Way RV Upgrade Kit Installation - 2020 Subaru Outback Wagon
- Video: In-Depth Review of the Universal Installation Kit for Trailer Brake Controller
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Raise Your Travel Trailer Height