Can Optronics LED Trailer Stop, Turn and Tail Lights Be Used with a 4 Pole Connector

Updated 02/09/2015 | Published 02/07/2015

Products Featured in This Question

Optronics Streamline LED Trailer Tail Light - Submersible - 3 Function - 11 Diodes - Red Lens

(369)

$27.07

Optronics Streamline LED Combination Trailer Tail Light - Submersible - 11 Diodes - Clear Lens

(126)

$26.78

Question:

Can a pair of these lights be connected to a 4 pin harness. I want to install them on a hitch mounted motorcycle carrier motorcycle sits sideways across back of truck, but need to unplug when the carrier is not on the truck. Dont want loose wires hanging, so want to use the 4 pin trailer wiring.

asked by: Bryan

Expert Reply:

Yes you can connect a pair of Optronics Sealed, Streamline LED Trailer Stop, Turn and Tail Lights # STL79RB to your 4 pole connector on your vehicle.

You will want a 4-Pole Trailer End Connector like # 18004, then you will want to connect the light's white ground wire to the white ground wire on the end connector, one red wire to green, and one red wire to yellow, and the black wire to black.

I have included a link to a video review of this light for you. We also carry the same light with a clear lens, # STL89RCB.

expert reply by: Chris O